Mod Banshee

If I have my banshee Bored 40 over how many ccs would that be?

I dont know about Trinity but from what I have heard on the drag surcuit that D&D and LRD is the Hot set up for drag banshee this year.

I would gear it up one tooth in the Front (15/41) and get it Ported and a cool head with 21cc domes and 28mm flat side Carbs and a set of V-Force Delta 2s. Here is the Mod I have on my banshee and I am running 300ft in High 4s FMF Fatty Pipes FMF Power Core 2s Cool head w/21cc domes Race Logic Porting Vitos Power Pistons 28MM Flat side Carbs V-Force Delta 2s Boost Bottle Team Alba Clutch Kit Hinson Clutch Basket Hinson Cushions Hinson Pressure Plate Lightened Flywheel Vitos Degree key Pro Flow intake 6 filtered air vents 15/41 gearing And On sunday I Drag raced a Raptor wirh a 686 Big Bore and a Titanium spring kit and Hot cams and a DMC Pipe and K&N Air Filter. and My banshee Killed it with no Problem

Yes you should beat him

BoonMan Is the man when it comes to Banshees. befor he lightened my FlyWheel it would run 300ft in 5.45Secs. And after he Lightened it now it will run the same Strip in High 4s.

I put the 15 tooth in tonight and went to the strip and My time went from 5.45Secs to 5.04sec I think I could of got in to the 4s but my front end came up off the start and I had to let off

Ok I got my FlyWheel Lightened by BoonMan and I also put self tapping screws in my rear Tires. And I want to the Drag Strip and my best time was a 5.04Sec in 300ft And I think I could of got in the 4s but off the start my Front end lifted up and I had to let off And I went from 14/41 Gearing to 15/41.

Can some one help me out. I was thinking about go to a 15 Tooth front.

Ok I know I have asked this before but I just got my Flywheel lightened. And I am still useing stock gearing and with my Flywheel lightened do I have to regear my she for 300ft?

I have a set of Razr 2s but they have Self Tapping Screws in them for Drag racing and I need a set of tires and wheels for trail Riding. And I dont want to spend over $150

Has any one did this if so how did it work out?

Yes I Know My Clutch set up cost me $532.88 I have heard of EBC Clutch kits but I dont know any one with one so I cant help you out on that one.

Ok Then I would say if you dont want to spend that much then Tusk makes and real good clutch kit for $29.99

I have the Team Alba Clutch kit with Hinson Clutch Basket and a Hinson Cushion and a Hinson Pressure Plate on my Shee. And I like this set up alot

99 Dodge Dakota-115MPH 04 F6 Sno Pro 106MPH 00 Mod banshee 80-90MPH

I have 28mm Flat Side carbs and I did not have to get new intake boots.

No I dont have a 90 degree porting tool. But does any one know were I can buy on.

Yes it could be the Pistons. With the 4mm Stroker crank you should be running 795 series Pistons.

Well I run Razr 2 rear Tires with Self Tapping Screws in them for Drag Racing.

That is the spec from Race Logic

We ported My shee with Race Logic Porting Templates but we did not do the Transfer windows. Do you think I should get them Done? The specs for this is 43mm from the Top of the Cylinder to the Top of all 5 Transfer port windows.

With this set up and stock gearing it will run 300ft at 50-55MPH

I had it on the gun about 2 year ago it had a Top Speed of 87-88 MPH and I did not have any Porting and I did not have the 28mm Carbs or the clutching. And I think it was a 1/4 Mile Drag Strip.

I run stock gearing for Drag Racing. But I do run 15/41. and I also am going to put in a 4mm Long Rod Stroker Crank.

What should the Top Speed of my Shee be? Here is the Mods I have done. FMF Fatty Pipes FMF Power Core 2s Cool Head w 21cc doms Race Logic Porting Vitos Power Pistons 28mm flat side Carbs V-Force Delta 2s Boost bottle Team Alba Clutch Kit Hinson Clutch Basket Hinson Cushions Hinson Pressure Plate Vitos Degree key Lightened FlyWheel Pro Flow Intake 6 Filtered air vents