87sheerips

well, im a broke at school so im guna keep the ported .100 overs, and put a new wiseco kit in them. These .100 over cyls have been awesome for the past 2 years with no probs, so im guna keep em till they fail. 150 compared to around 400 for ported cylenders w/o pistons says enough for me

hey all, just want an opinion on this. I want to hone my cyls, and get a .100 over top end kit. I know im at my limit and honing could cause some clearance. The local machinist says he can take down to a half a thou off, so i should be fine, what do ya think??

Just throwin this out there to see if n e one is interested. Just want to change up the power distribution a bit. Heres a pic of the pipes installed, spark arrestor not included with trade.

well, first off i was getting towed with a strap, and forcing a start that way. I checked compression a couple weeks ago, it was 160 in the left, 170 in right. It was about 10 degrees and im jetted for about 30. Im running 160 mains in keihins. It runs great when it starts, check out the vido section under ice drags to hear it run. I think im guna look into rings anyway... thanks for the ideas, jeep em comin!!

Well, i was riding out on the ice last weekend, and had a hell of a time starting her up. I had to pull start it every time, it fired right up and ran awesome. I could not get it to kick over though. Im sure plugs are in order but i figured if they were fouled, pull starting it would clear em up. Im pretty curious about this, any ideas??

Do you have an old style carrier?? i.e 87-89. If so, the 4 carrir bolta are worthless to say the least, yull throw chains like its your job. Update to new carrier/swinger if this is the case.

sweet i just bought a tusk kit with HD springs. I hope it works nice fopr ice drags this weekend!!!

radiator http://cgi.ebay.com/ebaymotors/ws/eBayISAP...TRK%3AMESE%3AIT Head http://cgi.ebay.com/ebaymotors/ws/eBayISAP...TRK%3AMESE%3AIT

BUMP, someone needs some nerfs round here!!!!!! Come on, i need a clutch!!!!

Yea, thats all I need is the dimentions, I am familiar with catia, I-Deas and CadKey. Even if not a swinger, the rear brake block off would be an easy lil project too. Some swinger dimentions would be kick ass!!!

bump bump bump

got pics of it nutcase???

judd, email sent

trade for nerfs, milled head, ??? got pics in this for sale section.

Hey all, just shoppin around for a clutch kit, plates and everything besides basket. If you have a new kit, give me a price!!!!! JD

bump, what happened here???

Going to Glass Bead blast the head and polish it up, new pics soon. If you want it it will be beadblasted and clean.

bump

I agree, figured Id try. Good luck trading!

go to the hardware store, i think they are 6mm diam, the length varies.

yea ill sell the durablue, its very slightly bent. 80 shipped?

just for shits and giggles, how do you like this banshee??

bump...bump... someone needs some nerfs!!! Will trade for rear axle or other offer.

CNC Mill it hopefully, I dont have time to do the whole design myself. Im looking to do some type of square tubing seinger, I saw a completely milled aluminum one on planet sand that was sick.

Just wondering if anyone has a CAD drawing of a swingarm. Going to try a simple a design in my next CNC Class. Any response would be great!! thanks....