Ryda85

i just put about 3800 worth of mods/parts on my credit card.... and still have stock suspension.....ima pass out when this bill comes in

have a set of dg with red nets

great....ill do this tomorrow...how many oz of grease fills it up? do you have a walk through for the carrier?

i know this is alot of questions...just wanna make sure i do this right so one zerk right where you posted and a hole through the sleve...or just through one side of it and lastly do i have to make some sort of vent hole to allow excess/dirty grease to escape and also let me know when its full

any seat covers?

those say 1 inch and .25 inch?

you are the man

ordered mine 2 days ago

i say buy the shocks for now....see how you like it and if you want a arms down the line just sell the shocks and get new ones or you could get some fyz shocks and use those until you get a arms

yes

ahh i bout a steering kit on ebay...13 bux...guss its ok http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=43981

can anyone post pics of a "how to" install a grease fitting on the swingarm and carrier...i searched and only found pics of them installed....not really a set of instructions..

i was referring to the wheel bearings.....are they sealed? how do i pack them

ok i ordered pivot works swinger and wheel and some belray grease...is there a certain tool thats used to pry the seal off the bearing to pack em with grease? or will a flathead work.. also i cant find a steering stem bearing kit....who makes one?

what grease should i use?

do new bearings come greased or do i have to greae them?

any difference in these bearing kits??? just got a gift certificate to rockymountain and i really need some bearings (wheel, steering, swingarm)

call david noss

just curious...has anyone run their passion stroker in the 1/4 mines about together and i am just wondering what it should run when gearded properly....it should have about 70-75 hp

you can also call your credit card company and tell them you want some Balance Transfer Checks....they range from 500 to about 10,000...depending on your credit....and they are like 3% for the life of the loan as opposed to 10% on personal loans and new bike financing. i have even bought a new bike with this method bc it gives me negotiating power of cash and a lower rate than the stealership can ever offer me

pm sent

whats gas mileage? who cares......wot the way through

throw some rockets on there

if you plan on porting...definitly keep the t5's....and there is no excuse not to get those cylenders ported with some builders doing them as low as 200 for the pair (Gorr)

i heard the t6's are good on a pretty stock motor