03banshee04

was just wondering a starting point on jettin with a stock motor,with fmf ram valves,+4 timming,cpi in frames,with 30 mm carbs, carbs came with a 155,should i go up in size and try that or just leave it as is and try it.

make that three i live about 5-min from the park. 3 dollars gets u in all day,have camping area also.

yes there is a bunch of us that will be out there,lot of play drag racing.there is about 6 of us that always go out there to have some fun,we hope to see u up here.

any pic of them? they need bored?

sorry yes also have t-3 the bike i was wondering about is my bike i plan on keeping stock my other bike will have the port work.right now i have fmf sst on stock bike.

Are these really that good or is it all a bunch of hype? would it be worth my money to go from fmf sst to rockets? on a stock bike was just wondering?

thanks guys tried it was about on had to lower needle to third pos,sputting a little,went up on main to 330, 30 piolt,will try it that way.i like how this pipes come out of the hole. did have t-3 on there,have some buddies with bills pipes that i want to beat. thank again.

HOW DO I GET A HOLD OF PATRIOT RACING? THANKS

WHAT IS PATRIOTS WEB SITE OR # WANTING SOME PORTING DONE THANKS

I just installed a set of fmf sst with titanium silencers, also have fmf reeds on stock cage and clamp ons with +4 timing adv,put in a 30 pilot,4 th clip on needle with 310 mains,havent run it yet. was just wondering if this sounds too rich,at about 400 feet above sea level,also running a champion 8332 plug,with amsoil 50-1,just want to now if this is a good staring point? thanks

amsoil 50-1great oil!!!!!!! just my 2-cents

I live in desloge mo,have toomey t-3 with clamp on k&n,+4 adv,running 30-piolit,stock needle in 4th,310 mains,runs very good plugs are a nice tan color

I have a uncut set of t-3 pipes and was wondering if anybody knows anyonne that will cut them? will i have to do anything to silencers? thanks

I was just wondering if anybody has ran or built a rdz triple port motor?I want help on decideing on a&s or rdz triple port motor for 300-foot sand drags. thanks

has anybody run or have a drag motor built by rdz? looking into the triple port motor for drag racing any body have any other builders in mind .