badcompany

Im the dumbest being in this nation? I got a 350 running low 6s in the 1/8 at over 100 and you got your big cheetah to run a whopping 88mph. Anyway, I do know what Im talking about since my dad is a retiree and I go to the base every day and know many people and family members who are in the service. I realize that every person has the oppurtunity to go to a combat zone, but that still doesnt mean that all members go to a combat zone and even if they do they dont all serve in combat. Also, soldiers go many other places besides iraq and afghanistan. My post was directed at the people who were bashing the military and saying that they would die as one of george bush's pawns in the war when I said that the whiny fuckers who were unemployed should join. Asshole.

You want your swingarm as short as you can handle it. I ran a 4 over with no bar and 3 inch foward a-arms on a gas 350 and ran 4.40s consistent with the best time of 4.33. This was on dirt with pro-wedges. Sand with paddles and your suspension setup will make a difference though, but with the mods in your sig i would stick with the 4

Theres other branches of the military besides army and marines as well as jobs in the army and marines where you dont see combat. My town has an air force base and most of the soldiers there dont train for combat, they do their jobs like running the gym, maitenance, mechanics, secretaries, nurses, doctors, etc. Theres all kinds of posistions availiable.

The elections over so arguing doesnt really make a difference now but... It just pisses me off that my parents busted ass their whole lives to eventually become successful, self-employed workers from nothing and to think that their taxes will get raised to help the sorry people who complain instead of doing something about it. Im a college student right now and am busting ass so that eventually I may get a 6 figure job, and it sucks that if I do close to half of my money will be taken for income taxes(Federal and State). There are asians and mexicans in my city who can barely speak english but own their own businesses and drive mercedes and vipers. To say there isnt enough oppurtunity in our country is bullshit. Hell, Obama grew up "poor" and was raised by his grandmother and moved from country to country and somehow he managed to graduate from Harvard, make millions writing books, and then win the presidency. Oppurtunities are everywhere. On a side note, I know one place thats always hiring and will take almost anyone from everywhere. They pay well, give great benefits, and will take care of you while youre employed and after, and trains employees skills that can be very helpful later in life, its called the United States Military. Don't bitch about how your country isnt serving you because there arent enough jobs when all you have to do is serve your country.

The Dow had its worst 2-day loss since 87 since the election. Wall Street may not have much confidence in the president-elect.

Ive got a 1998. $200 plus shipping.

Pics coming soon...

Complete motor MINUS transmission. I think its bored .060 over, not completely sure though. Milled stock head, cases are port matched and there is a little work done to the exhaust port. Cut and ported Vito's super stock pistons. Aftermarket clutch setup, either Barnett or FZR. V-force 2 reeds. Comes with stock intakes and FMF boost bottle. Case never broken. The reason I'm unsure on some modifications is the bike has been sitting about a year and a half and I can not remember what was done before it was parked. It ran good for a while and we ran into jetting problems. It would still crank, but we could not get it to run right on top end. Got fed up and parked it. Not real sure what it needs. $700 shipped. Also have some chrome shearer inframes. Great condition, like new. Id like $500 shipped.

Make an Offer

I got one one on ebay

I would go dm or twister setup. Truthfully, a lighter rider and good setup has potential to run the times you want on your current motor but at 230 lbs your gonna need a strong motor and a very good setup.

Thats cool. My builder had a little scooter with a big bore kit and ported and piped and whatever else that would do like 70mph in the 1/8 mile. He brought it to the dirt drags one time and won the kids dirtbike class, he beat a piped rm85. It was pulling little wheelies out there on the dirt. It hauled ass

Packard Lectrons are the shizz. Pretty expensive (like $650) but I guarantee you wont be dissapointed. Also, I dont know what kind of motor your running but we run 38s on our stock cylinder 350, 34 or 35 seems kinda small for alky. Give Dennis Packard a call and tell him what you got and where youre at, and he'll send you a set thats basically bolt on and go, maybe minor minor adjustments. He also uses his own needles which work very well, better than any off the shelf needles imo.

yes theres one attached to one of the grab bars.

Ive got some jugs of an rz...needs to be bored tho. Ill sell em cheap

Rear fender is white. I will sell it, but ill have to go get it out the shop and clean it up first.

I have a billit 2 over bolt on extension in good shape. Ill take $50 shipped for. They go for about $200 new i believe.

sorry no plastics either, theyre not in very nice shape and id rather not sell any junk.

bump. Pipes and works are gone. Still have everything else. Prices are negotiable. Please help me get this stuff gone

10k? When I was thinking about building an rz, i calculated having about 3k or so in mine. Also, its amazing how many bad riders there are. Every weekend I go to the strip there are several people spraying their liter bikes and still having trouble breaking into the 9s.

Rubber boots are in great shape on the tie rods and the a-arms. Sale is pending on the shocks, but if it doesnt go Ill send out pics to those who requested them.

No head lights. Need to get this stuff gone, make a decent offer on something if you don't like the posted price, like I said they are not firm. Have pictures of everything now so just shoot me a pm. Stock tie rods with ends-$20

Hey guys, sorry ive been slow. Tore the roller down peice by peice today, so ill be cleaning parts and taking pictures tommorow. I already have pics of the works and the pipes if anyone wants to see them... I was looking at the axle today and realized that the spacers for the wheel hub(axle is adjustable) are only about an inch each, so it may only be a 2 over. If anyone knows the stock axle length I will measure it and make sure. The axle will come together with carrier, brake and sprocket hub. also the stock shocks will come with the wishbone unless someone wants the wishbone by itself first. thanks More parts: Billet 2 inch swingarm extension-$75 Stock spindles-$40

Located in Valdosta, GA. If anyones interested in anything pm me an email address and ill take pics, hopefully today or tommorow at the latest.