Oilsmoke

A&S how to you like the wear of a stock clutch with 3 tommey springs? My passion stroker not slipped once since i added them and for the few bucks it cost it was Great Mod. i did 2 clutches with one 15 dollar set of tommey spring.

38 are a stock size for a 250cc MX bike my 385 cut in half is 192.5 this is 77% of that vol. But I don't think the 12port is that much more efficient than a 250MX machine. Pure Drag Racing I would use a 38 but for my needs 35 is what I plan on making work.I will use the Mikuni TMX35mm it will match my intake track the best.

I run a 14/44 and 21x12x8 9 paddle haulers I geared down where i ride it very steep sand and very deep. I need more paddle I think .

If my memory is working today. them charts were for a 370 long rod stroker motor.

SSbanshee He can't tell you bro. If he tries to it will come out like this. Hi my name is Alfred Ropechoker. My uncle just gave me a Banshee He built .He's a High compression engine designer for ToytechHP. It was a flawed prototype but hey it was free. It has all kinds of go fast parts that make it beat my friends 300ex and RM80. Fast as hell so don't f*ck with me Mr. Because I been drag racing it for like 3 weeks now and Nobody on this board with 14 years of life under there belt can Beat me. Because I am punk kid just entering puberty. BIGGED mouthed cocky teenager (just like the 3 I raised). Unfortunately Most people here are not impressed with a testosterone busts into the body. Little man I

Put them on .

120 on a SHee. what are some good choices for front tires that won't blow off the rims at that speed?

22-11-8 8 paddle ultralite haulers.not extreme/kevlar paddles.

BansheeBoy88 It shows you are of young in wit. Better zip it up the fish think it's a night crawler.

Pc's are good all around pipe But if does favor dunes more than trial, But they have a more over all power spread than cpi's or tommey so they be a better pick for what you posted and there little cheaper to buy.

Nugshee I own a pair of 450 . ANd you can order up to 700 mikuni large Hex.

All I can think is you guys are all lucky. I am stuck with my Mikuni 34mm round slide old school carbs and all alone with know one to swap ideas with. I was and have a spot at 1/8 to 1/4 throttle i can't find the the right pilot so i started thinking i was rich on the cutway. it's a 2 and i do have a set of 3's i plan i testing soon after i read this thread. oh i jetted down to 270 and i still can't pull 6th gear with a 14/44 in the sand very hard. 5th gear it pulls good but 6th is still soft. plugs are look pretty close too. any ideas or question for me to help this loner out?

I'LL take his ebay name or a link to an item than i put him in my favorite fold for the future. will you cut the needle jet down or make a custom carb plug with a deeper pocket?

Jeez took long enough. For my SCARCASSISM to get noticed.

A&S now i belive you I read, you biuld some mean ass banshee motors. what gearing do you like with that engine? Carb size & type? Curious George wants to know

Firehead that does sound good on paper Let us now how they work out. will you flow bench them? and can i get a pair of power jets for 8 bucks each?

Where did you get that spec? I am just curious.

Hey Dumb ass why waste a power jet on a stock carb? Muhehheheehe

That was a great mental picture Locogato Becuase that is what I seen. I am just glad I had a Tow rope.

If you are wet & black on your plugs with 340 mains Than i would jet down.unti it starts to run at wot open throttle. try 320 test ride if better but not great try 310 than 300 you will find the right main just becareful and watch the plugs. what is your compression Psi at. changeing your octane level will not help your bog.

Bad new Cotton eyed Joe. We still need one more Dune trip this Year how about Mid Sep? you can start the winter rebiuld in Oct. Oh if you like i can reupholster than seat for you. after all i have 25 year practice at it. Take me about 10 mins and no charge.

bansheeryder_69 Your Friend is Right you can do it But it would cost as much as buying a new head to remachine it all over agian. SO your friend is wrong also. And on a 2nd note, where were you last weekend? Me & Cotton eyed joe was up there at Egin lake for 3 days and i never got my race with you.

That is alot of horsepower for a First post don't you think bansheeboy88. Who did your porting?

bare, painted, chrome, dent free more details

I am on Kazza Down loading some of this Old ass Floyd Talk about seeing tracers