Wassup350

Let us know if you race him, that should be interesting. Good luck smoking him.

I would say that the banshee would definitely win, if the rider knows what he is doing. For one the banshee is faster anyways, and for an other with that much heavier of a rider it would give the banshee an additional advantage.

Im not experienced with this but i would say that you just get it wet and sand it.

I hate dealerships they are good for nothing i tell ya. I'm having the same problems getting jets.

Hmmm, unless you want to go with a lighter metal such as aluminum. You could just cut off the sub frame that you have now, get it welded where ever it is cracked, then have someone weld tabs to the frame and the subframe so you can bolt it up.

That is so stupid because i dont see what the hell is wrong with going down trails and roads like that. DEC can suck it, most of them are nothing but dicks.

Try greasing all the grease fittings. It may also be the brakes, i dont know what to do for that i have the same problem.

You need a compression tester. Then you warm your bike up a little, then hook the tester up to the spark plug holes. The compression should be the same or really close on both cylinders. You can get compression testers at Sears or i think napa may have them and other autoparts stores.

Theres a place up in Watertown NY, called best machining that did it for me for 30 a cylinder.

Actually it does get pretty muddy but, up in the higher hills than where i live it isnt to that point yet there is still over a foot of snow. I'm not sure how it is near lowville but that's how it is up in redfield.

lol i knew it was a joke as soon as you said cool 450r

It could probably be an adjustment problem, and it's slipping too much and burnign up. Or your riding the clutch too much or something. Idk just some ideas.

argh i beleive i missed it, and i actually have that station too!!! Every other quad show has been on speed which i cant get

Thats a good one man I wish i had a friend with one i want to ride one so bad.

I hate dealers so much, i pretty much buy everything out of catalogs online, unless its something small that i think might be at the dealer even though they wont even have that!! LoL we have a loccal Hermit up in the hills of Redfield. He lives in a little hut out in the woods.

An other thing that really amazes me, is their lack of common wear parts. I went to the local polaris dealer to get a fuel filter for my sled and the ididot behind the counter of course had to look it up on the freakin computer. Im like its pretty simple it just hooks up to the fuel line and he goes back to look for one and is lik "uh were out of them." I'm just thinking, give me a fucking break, we live in the snowmobiling capitol of new york and the god damn local dealers dont even carry fuel filters It just astonishes me.

Cingular on a Nokia phone. Lol my phone takes quite a beating being in my pocket all the time. Many times has it fallen out while working on my car or banshee or something and got all scraped up. If you looked at it you'd think it was like 10 years old.

The newer ones have brake lights also. And nice grippy seats. Also the headlights are brighter.

Whoa nice avatar, beer is a helluva drink

I run a K&n with an outerwear and lid on and im very pleased with it. Definitely run it with the lid on if your gonna go through mud or dust. Extra protection is worth loss of horsepower, in my opinion.

idk, i seen one before and it went wiingg winnnng braaap braaaap

right on man, dont take his shit. give em hell

OK so i go into the dealer which is like a 30 minute drive to get some jets and bolts. First i had to get a chain tightener, he looks it up on the computer and comes up with one of the rollers i say no thats not it its on the axle carrier. so he looks for that and finds it and i ordered it because it wasnt in stock. Then i told him i needed some jets since i just put a new filter on and i did some air box mods to it. so he goes and get some pilots that i needed and i ask him if they were for a banshee and he didnt have a clue what i was talking about so i ended up waiting for like 30 minutes for him to figure the shit out. I have the same problem with my snowmobile dealer ship. The parts idiots dont have a clue what they are freakin doing and dont know shit about sleds.

thats crazy. i cant imagine fitting that many people on quads. And if i ever did try that it would be with hott chicks

From what i hear the YFZ has tons of torque and it revs like a 2 stroke. Maybe not quite like the banshee but it revs pretty quick i guess. Stock vs stock the yfz is better. I think your like the 200th person who has asked this question lol.