txblueshee

Whatever blows your skirt up Mike

StangTtops88, STOP FLAMING!!! An opinion is fine but stop posting bullshit on this site or you will be dealt with accordingly . Mike

Meat has the 404 vito's kit...check his site out at www.thebansheezone.com. Unless i'm mistaken I thought you had to go w/a different crank to utilize the kit?? BTW, Meat does every kind of riding you could think of. Mike

Did you put your slides in backwards?? Did you adjust the air/fuel screws?? Did you get the carb tops all the way back on?? Did you make sure you didn't bend the needle?? Did you change your pilot jet.... what are your jets?? Mike

I posted a newbie FAQ and it didn't go over as smoothly as I thought it would've. Anyways, There have been alot of stupid post lately (none in my forums)...but If you see a post that you don't agree w/ or it's offensive, just click the report button and a report will be sent to one of the mods in that forum. THanks, Mike

i think so too..... I think so three . Mike

Hell I didn't know it wasn't gonna set well w/ you guys. This wasn't directed to everyone...just the people who are new to this site and do not know how to get around so they wind up posting the same question that was just posted about not even a week prior, thus it's not on the first page of the forum they are on so they post again. Doing a search will dig up older post that will most likely have better responses in it b/c SOME people get tired of answering the same questions everyday so they do not put all there info to use in someone's post(b/c they just answered the same question w/ a big drawn out reply 3 days earlier). Wasn't meant to piss anybody off...hints the little bit of sarcasm in a couple questions. Mike

phuck it....I'm through w/ this Mike

There has been most every question covered since the forums have changed...most the time the questions asked are only 2 pages deep. This post was not meant to bash, flame or start fights....just to inform newbies of the do's and don't of newbie land. Mike

Sucking sand don't have shit to do w/ the air box, you'll NEED to get a pro-design or noss(cheaper$ and same quality) intake adapter which allows the use of a clamp on filter. After that you can run w/out a box(most HP), vented, full whatever. Don't touch the box until you get that adapter w/a K&N or Foam filter. Mike

LMFAO!!!!!!! Ninja Guiden!!!!!! I'd say 55hp Mike

Gear it up a tooth, buy a noss or cool head w/ domes for 93 octane, and pick up a reed cage setup. You'll be smooth as those pipes can go w/ those mods. If cash is tight you could just buy the 15t sprocket. Mike

There are alot of people that run open filter(no airbox) but they ride sand. It's not a good Idea to do it if you ride in nasty conditions or you have the stock filter setup. I run a pro-design adapter setup w/ a double bagged K&N paper filter. Mike

Some of matt's handy work Let me know if you got my email, jim Mike

Duece, I sent you a pm about the pics.... hit me up at mesquite@gcecisp.com and I'll post them up for you. I can also take you step-by-step on how to post them the new way if you'd like. Mike

With the combination of my fatty's, 157psi, and boyeson rad valve. My 'shee has the smoothest pull of ANY 'shee i've ever ridden w/ similar mods. I had the opportunity to switch 'shees for 5 laps w/ a guy who had t5's. Let's just say I wanted back on mine by 1/2 through the second. For mx I would go w/: Fatty's, pro circuits, mr.bills, ptr mids, sst's or 2:1 (in no particular order) K&N setup w/ adapter plate (noss, pro-design etc..) Delta's, boyeson, or ported cages(no experience w/ those) With that motor and good chassis mods you could place 1st every weekend in the amatuer (A class) or pro (b class) circuit. Mike

WAIT!!!! Unless you want to throw away 30 bones then use mrmatt. He does it for 100 bucks+shipping, Shipping would be about 20bucks both ways. Matt does KICK ASS work, hopefully blue duece will chime back in here and post up a pic of the swingarm matt cut for him. Several other people have cut swingarms by him also, he does REAL good REPUTABLE work. You can take a chance on bob around the corner and spend 20$ extra, or you could pocket the 20$ and buy oil/gas to test your new arm out. Mike

You have to overcome the inner idiot. Mike

Vinney, what type of riding do you do?? You might want to look into a shortened swingarm. There are guys that have 65hp at the rear wheels and run shortened swingarms w/ no problems. A guy on here (blue duece) is about to have a 75-90hp motor w/ a -2 swingarm. Mike

LMFAO!!!!!!! Hey daniel son(kung fu champion): Wanna buy a powerband?? Mike

Diablo if you need more info about the chopped swingarm click HERE and if you need more than that do a search.... there's plenty of info. Myself, blue duece, banchetta, meat and mrmatt(the guy that cuts them) all have MANY of hours of riding on our cut arms. For the most part we all ride different terrain so between us you could get all the info you could ever need. Meat climbs 80 degree and steaper coal hills (see img. forum for pics) and has not rolled his yet b/c of the arm. Mike

Broke, your not the only one that he's driving crazy. I've gotten all kinds of complaints, there is one way to some this kid up "POST WHORE". I've asked him numerous times to please keep all his questions he can in one post. People reply to his questions and he completly ignores them. I didn't think anyone could be this ignorant but I guess I was wrong. Mike

Man you start like 3-4 different post all about basically the same thing, then when someone(banchetta) gives you GREAT advice you straight up ignore it. That's pretty phucked up. Mike

WORD!!! Mike

I've had my shifter moved up for about 6months now of HARD riding...still doing good. You might have stripped your shift splines....NOT GOOD AT ALL. My buddie did that and just white-trashed it, he just welded the shifter into place. I still make fun of him for it. Mike