CoolRaptor2001

((((As of now iam still unable to borrow another truck besides my grammas so to anyone interested we would have to meet within an hour of Marietta ohio, right on the river by WV)))) Gonna put it in local paper and see what happens also so ill post on here ASAP if it gets sold.

Unfortunatly indiana is a bit too far for me to travel. I would have to borrow my grammas truck and she doesnt want it going outside of the mid ohio valley/west virginia area I asked her about it today and thats what she told me. Sorry man, nice looking bike you have there too

Testing the waters right now, depending on what offers come up. I have a 1997 Yamaha Banshee with fresh rebuilt motor bored .60 over with Wiseco Hotrods crank and rods, vitos cast pistons, stock pipes, new clutch plates and springs (stock replacement-need replaced again, read below)), new waterpump seals, ITP holeshot rear tires, Full skidplates except a-arms, 2001 blue plastic with CEAT graphics kit and seat cover (looks sharp), pissed off eye headlight covers, TORS removal kit, New carb (cant remember which, think it was left), K&N air filter, airbox snorkel removed, rear brake caliper cover by maier, teather kill switch, new front wheel bearings, all new suspension bushings just over a year old, AC rear grab bar and front bumper(front bumper is bent some from previous owner) and new shifter. Have a spare rim(matches the rest) and a small box of oil for it somewere too. The bad: The key-ignition switch is wired backwards. The handlebar kill switch does not work, however the teather kill switch does. It needs 2 front tires, the ones on it are bald and need filled with air every day or two. I think it may need new clutch plates soon. Tranny got stuck in 3rd gear while out riding one day and by the time I got it home it was slipping some. A dealer went thru the tranny and fixed it (cant remember what was wrong) and I had them put all new waterpump seal/gaskets, and all gaskets on the righthand side of motor in. I dunno if its the jetting or what but it is very very cold blooded, more so than other banshees ive seen. Sometimes takes a few kicks too start but that might be from not being ran regularly. Runs fine once its warm though. Like i said, probably jetting of some sort. Motor was rebuilt about 2 years ago, has maybe 20-25 total riding hours on it since then. No good places to ride anymore, and I got my drivers license about the time I got the shee (almost 3 years ago) so I got busy with other things. I never rode it real hard, altho iam the 2nd owner I believe. HAVE TITLE. The Camaro is bad on gas in the summer so I need something to drive during the week. Looking for a yzf600, R6, gsxr600, ninja600. Mileage is not important just so its not overly high. Dont matter if its stock or not. Dont want anything over 1000cc, i dont want to die and/or pay higher insurance for a litre bike. Must be reliable. Iam located in southeastern Ohio(Marietta) by the Ohio river and West Virginia border. Would prefer someone close or someone who can meet close because I would have to borrow a truck to take the 'shee to you. Pics available. Didnt post them here because the pics are on another computer at the moment. Let me know what ya got!

Ok....I cleaned the filter, made sure the fuel was topped off and good, turned the idle screws 1 turn in, put 2 new plugs in it, kicked it over ONE TIME and.......and..........it fired right up Iam guessing it is jetted for colder weather perhaps? It seems to run like a raped ape when its cold but runs like when it gets warm out...weird. Well iam gonna go out and kiss and makeup with the Shee and piss off the neighbors, thanks again for the reply :-)

I forgot to mention in my first post, it has a TORS removal kit installed. Iam going to go mess with it now, wish me luck hehe Thanks for the reply

Greetings! Its been a while since ive checked back here. Anyway, for a little background on my shee its a 1997 with a new wiseco hotrod crank, vitos cast pistons, bored .60 over, k&n filter, airbox snorkel removed, thats about it for motor mods. The motor was rebuilt in early spring, lasted 2 weeks when I got it home and started seeing a white tint in the tranny oil, turned out to be a waterpump seal (or so the shop said, they replaced that under there warranty). It lasted another few days and started sputtering at high RPMs just as it hits the powerband. The temp outside hadnt changed at all since rebuild by the way so i can rule that out. Not long after there were some family issues and I didnt realy do much riding for about a month and a half. Well I got the shee out a few weeks ago and after filling the tank with fresh fuel (there was maybe half a gallon of old left in it) I kicked it over and it would start and idle, but as soon as I would give it any throttle one of the cylinders would die instantly (cant remember which one at the moment, think it might have been the left side). As of now, I can kick it over and it will cough ONE TIME then it wont do anything untill i pull the plugs and clean them real good or replace them, then it will cough ONE MORE time before I have to repeat the process. I did this for 4 hours continously one evening and couldnt walk the next day so I parked it and was gonna just wait untill next spring to mess with it. What changed my mind? I did a poker run a few days ago and had to ride 50 miles on ATV/4x4 truck trails in the rain and mud up to my waist in some of the ruts on my dirtbike with a bald rear tire. Yeah it was fun.....NOT. There were a few banshees there, only 1 made it more than a mile though, some didnt make it out of the staging area Sorry for typing a book for you all, I just wanted anyone who might try to help to know the background on my shee. Thanks in advance for any replies :-) I gotta get my shee running, since the poker run iam starting to get wicked thoughts of 05 predators and vforces in my head......they kicked so much @$$ on those trails we were on lol

!!

CoolRaptor2002 No I dont own a Raptor660.

Had me goin' there for a sec

Yeah they seem to know what there doing, one guy at the shop supposedly has been working with banshees since 'the begining'. Well, whenever my grand dads truck is fixed ill get him to drive me and the shee over and get it all taken care of. Bah, shee is down again Atleast it isent anything major i guess lol, thanks again for everyones replies

I DO know that. I let it sit for about a half hour after riding before I would check it. That should (??) be enough time for the oil to settle back down in there. I checked it last night again about 3 hours after i had been riding to make sure it had cooled down also. The shop said its either a seal or the water pump, if its the seal they will cover it 100%. Yes it is kind of milky looking, its not white but its a grey-ish color. They told me to take it back to them on monday but iam probably gonna have to wait a while because the truck we carry it in is having is own tranny problems. Iam just gonna take it back to them and have them do it that way if its messed up again its there fault. Thanks for all your replies, like i said before I dunno what i would do without this place P.S.-When I wrote "Ive checked the radiator and the little tank under the seat and (according to them) iam not loosing any." I meant according to the res. tank and radiator, not the bike shop. They havent tried any BS so far and I dont suspect them too. There well known around here so if they did it would only hurt them.

I just checked the tranny oil (first time today) and its a little above the full mark but not very grey. When I last checked last night it was right at the full mark. One thing i noticed is when this happends its overnight. I can check it 50 times while iam riding, even if i let it sit for a half hour or so to cool then check, and it will be fine. But if it sits overnight then its above the full mark the next day. Weird. I wish I had a digital camera so I could show you all a pic of it, because I saved all the oil and you can clearly see its dark grey instead of the normal black. Frocashmoney--Blacks Motorsports in Parkersburg West Virginia built it. There realy respected builders for banshee motors around here and ive never heard of anyone having a problem with them. They 'stand behind there motors' so when I call we'll see what they say.

Ive checked the radiator and the little tank under the seat and (according to them) iam not loosing any. Of course that dont mean anything it could still be burning some just not enough for me to notice. Iam calling the shop that built it soon as iam done here, thanks for the replies

As you know, I had the shee motor completly rebuilt with new crank, pistons, all that good stuff just recently. Well the shee sat for about a week and when I went to start it up to go riding, it wouldnt start. I ended up cleaning the plugs (they were fouled) one time and pushing it down my driveway to get it started. It ran perfect the whole time. Well a few days later I got it out to ride again and when I checked the tranny oil it was WAY to full and was grey in color. I figured it was caused by it not starting a few days prior and changed the tranny oil no big deal. The next day (today) I checked it again and it was overfilled again and grey but not as bad as before. So I once again changed the tranny oil. It also was a little hard to start, had to kick about 15-20 times before it would even fire. It ran perfectly after that, and I ran it hard too just to see if it would burp or anything-NOPE ran fine. The oil was at the right level and black like its suppose to be when I parked it tonight so iam gonna check the tranny oil again tomorrow morning and if its overfilled and grey iam calling the shop who rebuilt it. Any ideas what would cause this? I was thinking gas mixing with tranny oil some how? Iam not loosing any coolant and the exhaust is normal-dosent smell like its burning coolant or anything. Any help is greatly appreciated, and if this is a retarded question iam sorry iam just paranoid since I just put $1500 into the motor not to long ago

Who cares? lol