Blue Duece

well id sip that beer and see who's winning consistantly (i figured we'd all know that) but when all else fails id get a passion engine, my self id swap a warrenty and tech suport to haul ass anyday, whats cusomer support? send the guy your motor not your juggs if you have to call the guy and ask him how to reasemble your motor or why id doesnt run after you did, you don t have the budget to build a race motor, grind the juggs your self and keep your fingers crossed

thats been there for ten years its right off ranchero before you get to the the airport,you cant miss it you make a left right onto it........ we spray painted a line at 300 hundred feet across it......you got 600 yards of pure flat asphalt and along side it the dirt is flat and groomed, ive dragged guys and i take the dirt they take the street and beat em for 20 bucks.......its a powerline access road if you follow it up you can jump into the cali aquaduct and cool off......the county sheriff is starting to come out and chase us off though so park a mile or so away in case you gotta dash, but the bar we were talking about is a couple of small foot hills away......its a fun ride man

heres what id do......i asume by a full top end port you want to either drag on something, asfalut dirt or sand, lets use sand as an example.........head for glamis or dumont, park, crack a cold beer and watch whos going the fastest, ask said fast banshee rider whom or who ported said fast banshee, that would be the builder id go with........

.............where at man, Honda valley is my backyard...............you talking about the little bar on arrowhead hwy (luke warm beer and free hot dogs on sunday?) a few miles from lake hesperia across the street from deep creek?

i hear ya casper and the reason my medical insurance is 700 a month is because im paying 665 a month to cover the cost's of the wetbacks sucking on the system, this countrys so fucked up, i mean most places you walk in with no cash they kick you to the curb, next thing you know a illegal will be able to walk into a bar, oeder a budwiser and not have to pay for it and i walk in and order a bud draft and the bartender will hand me a 12oz beer and charge me 9 bucks..........we as a nation need to stand up

927 @50:1, crank oil honda 80w gear oil, i could run it dry though i had my gear box "neo-sealed" zero friction to about 5000 degrees, nasa coats all there parts with it, my tranny shifts like a pistol with a hair trigger, there 2 cycle oil is good out to 100:1, i use that in my cr and havnt done rings in 300 hours..its good shit

its saturday and my kid falls out of a godamm tree and breaks his arm i rush him to the ER, i get in line with 40 illeagal bastards with the sniffles and if i dont have an insurance card i get turned away, but the wetbacks get seen by a doctor........ my fucking tax liability is upward of 400k a year, cause i run a business and pay my taxes? and pay 700 a month for me the wife and 2 kids to have medical insurance.......fuck me thats just bullshit...my brother owns a constructuction company with 65 mexicans who all have fake id......he had open inrollment for medical insurance, and not one of them illeagal wetback mother fuckers signed up cause they get the shit for free, and here im making a fucking house payment for shitty medical insurance each month, America sucks fucking cock if you ask me.............if i went to mexico i couldnt get the fucking time of day from there goverment..............its bullshit goddamm it

our goverment is trying to pass a bill that allows the criminal aliens to be legal, they allready have more rights in this country than you and i do, there trying to pass a bill that says if i pay youi 35 bucks an hour and i can get a mexican to do your job for 15 i can fire you and hire him as long as i give you notice that im going to shit can you.....we need to hang any of these wetback mother fuckers who are in the leguslator........a senetor said today if this bill passes the usa will go BK just in the social security alone since they have all jacked our SS#'s...it will cost 100's of billions of dollars.............i had a Mexican tell me we stole california from mexico.......i informed im in the 1800's we paid 18 million for this peice of shit and if we gave it back to them they would break into our sourounding states, because they live in a shithole, and want to hang with the white man...........any fucking mexican who has broke into this country is a criminal.............fuckem all

sounds like your buddy is right on check...let him do the work then ride the shit out of it..............

id get the slotted polished itp's.......

id get the slotted polished itp's.......

im so fucking lost????????? noone can be that goddamm dumb and still walk upright...........

anything will work as long as your cases arnt empty, in honda two stroke trannys they run 80w, some guys use thin trany oil....i like the thick stuff since my trany whips and churns the oil, ive changed my oil with the bike hot and my 80w honda oil came out of the cases like piss it was so thin....some oils will make your clutch slip

take the 5 south to the 10 east to the....... 15 north, climb the cajon pass and apple valley is about 30 miles north...bell mountain is there, everything is to your right of the freeway(east) if you go to far and hook a left (west) youll be at dumont dunes

the lake bed has about an in inch of soft lommie shit and then its hard packed, not really a sand condition...its all about traction

have you had better luck at elmirage? i live right at the 15 and 395 its really soft every where out here sand is way different my -2 swingarm hooks in this shit ........i could see a four stroke smoking you........you with a +7 swingarm you need deep sand for traction setup like that

real simple cause two stroke porting wouldnt pay my fucking electric bill, let alone a 26k a month mortgage bill, all i know is a 90 day turn around time is bullshit, for any business..... and your right i am a recording guru ive been in biz 30 years probally before you were in your daddys testicles, back in the 70's we used to grind our own cylinders, on kawi tripples and yamaha rd's, and they hauled ass..........fuck porting my juggs i need my bible autographed

yeah last month it was 8 degrees with 60 mph wind..............

PUSSIE.........i dont see your point it's 118 degrees in the shade when i ride....ill say it again......PUSSY

for starters rich my ass, my biz is 15% profit and start up is a mil 5, times 8 = about a 250k nut a month in leases(thats equipment ill never own), so if i dont keep my place full im Totaly fucked grinding cylnders is pure profit, start up is what under a grand and your moms garage?....im not bashing this guy, he runs a service business, call a plumber and have him show up 78 days later, send your computer in for repair and find out 2 1/2 months later the guy hasnt looked at your shit yet youd fucking FREEK............ so we are talking artestry, if you think the recording industry isnt "Artistic" your dumber than i thought, if someone calls to book one of my rooms and i tell him sure in 78 days i can get you in,.... i hear a click on the other end of the phone..........just so we all know Passion had my WHOLE motor 21 days and 13 of that was shipping...and yes you can over see employee's performing your craft, ive taught every engineer on my staff what i expect and need to see, when i was by myself and started to have to turn down gigs, i thought gee shit maybe i need more gear and more employee's....and yeah everyone is right no matter what he does to your bike its gonna be an improvement, and that generic port job takes at most 2 hours ive watched Rudy Kurtz do 8 of them before lunch and with a beer in one hand.........

well let me see i run a sevice biz myself, so for example virgin records sends me the latest greatest recording star on there rosters, master tapes to edit, and i sit on them for 70 days, at that point im looking for a new client and can take the 5 million dollars in biz i do with them a year and flush it down the shitter......thats why when i started my biz in the early eighties and i started to grow i added more editing suites more recording rooms more film rooms, and with that came 40 employees its called fucking expantion......now if this jeff kid is Fucking rembrandt with a grinder, and is the only one on the planet capable of grinding your juggs out well then hell schedule, when he has the time to do your shit, but if my bike was in peices for 3 months id be kinda pissed, thats why you schedule shit?? every sit at the doctors office for 78 days waiting to see him?....and just because he has your shit for 3 months has nothing to do with "quality" he's goin to spend the least amount of time porting your juggs as possible, when jim at passion ported one of my bikes i blew his horn on the HQ and a month later he was buried in work as well as has been several builders on this site, any fucking port work done to your bike will be 100% better than it was so im sure you will be impressed, maybe send him your bible to autograph, but porting a 2 cycle engine aint fuckin rocket science

damm he's been porting your juggs for 78 days?.....fuck thats great service......i kinda did the math, he's making 00000.2 cents an hour to port your jugs, this guys sounds like a super hero to me........where do i sign up?

i know a guy who can suck his own dick...........but if his shee has a 170 psi per jug or better he needs to run 104-108 race fuel

HUH?.........

pretty much all motorcycles have a twist throttle the thumb thing was a jetski, quad thing ..............i love my 1/4 turn twist, most guys who grew up riding motorcycles find the whole thumb thing awkward