TurboBanshee420 Posted February 1, 2008 Report Posted February 1, 2008 (edited) Please don't ask unless you really want a item swinger stock.... all new bearings stock axle.... straight as an arrow no damage 2 stock airboxes..... 1 as proflo with foam twin air.... 1 is bone stock with lid... both in good shape foot pegs propeg nerfs....AC... with custom fabricated support bar (early propegs didn't have the slip tube in the front) Stock brakes.... front and rear (has block off) rear brake line 5.9gallon IMS blue tank with elec. intank pump for alky black tank cover... brand new!!! Stock pipes blue race cut.... goes with the oversize tank (cut to match it) 34mm PJ's.... gas shearer drag pipes... inframe.... REAL carbon fiber silencers.... $400 + shipping also have the original stingers for the shearers... LOUD stock clutch cover... brand new 1 +2 full flight a-arm....lower... brand new 1 +2/+1 full flight a-arm.... brand new Stock reeds and intakes 1 set of pro-X ultra lights .020 pistons with swaintech ceramic domes and PC-9 teflon skirts.... 3.5 hrs like new... Used for 1 ride as a go between motor, before the new +4mm crank and jump to 66mm pistons. and plenty of other parts for other bikes too!! Edited February 1, 2008 by TurboBanshee420 Quote
bbcmudtruck Posted February 1, 2008 Report Posted February 1, 2008 Hey man send me a price on the +2+1 ff a arm. Which one is it, left right upper lower? I wouldn't mind having a spare. Ryan Quote
TurboBanshee420 Posted February 1, 2008 Author Report Posted February 1, 2008 both lowers..... they sent me a mismatch pair... I think.... well I'm going ot have to look them over before I tell you which one is from what side. 1 is a +2 the other is a +2/+1 forward Quote
TurboBanshee420 Posted February 1, 2008 Author Report Posted February 1, 2008 (edited) Pj's = $200 or $220 with the cable too IMS tank = $150.... has subaru WRX fuel pump inside.... you will need a fuel pressure reg. Also has a real fuel cell cap installed, instead of the screw on cap. Clutch cover is bare... just like you get them from yamaha. you will need the parts from your cover...(i.e. vent nipple and pump shaft bearing/seal) $70 is what I paid for the one from direct drive. I would like to get close to that. anything else....? Lemme know I will take pics of whatever you guys want to see. I have the next 2 days off finally. First weekend off since christmas Edited February 1, 2008 by TurboBanshee420 Quote
trick350 Posted February 3, 2008 Report Posted February 3, 2008 Pj's = $200 or $220 with the cable too IMS tank = $150.... has subaru WRX fuel pump inside.... you will need a fuel pressure reg. Also has a real fuel cell cap installed, instead of the screw on cap. Clutch cover is bare... just like you get them from yamaha. you will need the parts from your cover...(i.e. vent nipple and pump shaft bearing/seal) $70 is what I paid for the one from direct drive. I would like to get close to that. anything else....? Lemme know I will take pics of whatever you guys want to see. I have the next 2 days off finally. First weekend off since christmas pics of pipes and silencers Quote
TurboBanshee420 Posted February 5, 2008 Author Report Posted February 5, 2008 motor mounts cut for different motor....??? some of you guys wouldn't be bothered by this Quote
Troubledsol Posted February 5, 2008 Report Posted February 5, 2008 How much for the black tank cover shipped and which pieces is it Quote
TurboBanshee420 Posted February 5, 2008 Author Report Posted February 5, 2008 (edited) It's a OEM '02 black tank plastic cover. from the rad cover back. In other words it is both side panels bewtween the seat and the radiator. It's in brand new cond...... $40 shipped... depending on where you are. Edited February 5, 2008 by TurboBanshee420 Quote
BigRed350x Posted February 5, 2008 Report Posted February 5, 2008 How much for that AC looking bumper you got in your pics shipped to 82901? thanks Quote
TurboBanshee420 Posted February 5, 2008 Author Report Posted February 5, 2008 It's for the 250r.... make me an offer... my zip is 14534 Quote
sheegreen Posted February 5, 2008 Report Posted February 5, 2008 How much for the rear brake caliper shipped to 67337 Quote
cato Posted February 5, 2008 Report Posted February 5, 2008 How much for the rear brake caliper shipped to 67337 Check your pm's Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.