dumping feul

[lilbanshee]

my bike is dumping feul out of the left crb at the overflow lines. is the float stuck and if so how do i fix it?

[black sunshine]

my bike is dumping feul out of the left crb at the overflow lines. is the float stuck and if so how do i fix it?

 

Try giving the float bowl a few taps with a screwdriver handle. If that doesn't work, take the carb apart and give it a good cleaning and then blow it out with compressed air. Check the float height and inspect the needle/seat area for wear.

[EastCoast Banshee]

Id just tear them both down and do a good cleaning on everything. Doesn't take long and keeps you from headaches later on.

[BellicoseBanshee]

take the carb apart and give it a good cleaning and then blow it out with compressed air. Check the float height and inspect the needle/seat area for wear.

I Had the same problem one trip to the dunes. I did the same thing black sunshine is suggesting. Never saw sand/dirt or anything else when the carbs were apart, but the good cleaning and check-up solved the problem. I know this might be common sense, but if you do one, do both. Also, if you are not familiar with carbs, disassemble, clean, inspect, and re-assemble one carb at a time; ensuring the parts do not get mixed up makes life much easier!

[CMAC]

How old is the bike? If its been sitting awhile you might want to get rebuild kits right away and be done with it.

[tedd1]

How old is the bike? If its been sitting awhile you might want to get rebuild kits right away and be done with it.

I get kits from my local Yammy dealer. I can do both carbs for about $25. Done every season to prevent probs before they happen. :thumbsup:

[r/atvshee]

If all that doesnt work. Try swapping floats. Same thing happened to my Keihin pwk 35's when i just got them. I ended up tearing them apart swapping carbs, ect. It was a pain in the ass. I finally swapped float with a spare 35 i had laying around and it did the trick.