RagunCajun Posted June 2, 2007 Report Posted June 2, 2007 I've been spending a lot of time on this forum and i see some pretty built banshee's. I see some atv's that are drag only that dont even look like a banshee. So my question is simple, what is the fine line where YOU think a banshee is not a banshee anymore. For me it's when the front is stretched. I can see a longer rear via swing arm but once you go longer in the front....it just looks over done. I understand it's for a purpose and it works. There's another part of me that says as long as it's a twin cylinder two stroke it's still a banshee no matter what but the first part of what i said still comes to mind. This is not to start a war, just wanna get some people's opinions. :shrug: Quote
r/atvshee Posted June 2, 2007 Report Posted June 2, 2007 I would say when the front is stretched. Or like a motor swap like a tripple, street bike motor. Quote
Wagonz Posted June 2, 2007 Report Posted June 2, 2007 Id say not a banshee if the motor was swapped, but still a banshee if the front is stretched Quote
fastbanshee8 Posted June 2, 2007 Report Posted June 2, 2007 A Banshee is no longer a Banshee, when the motor is changed out for something completely different. Like a crotch rocket motor, snowmobile motor etc. It's still a Banshee, even if it has a cub, or big stroker motor. Quote
bonbon Posted June 2, 2007 Report Posted June 2, 2007 As long as your still using a banshee bottom end its still a banshee, like majicmike's cranker. May have been highly modified but it still started out as a banshee and to me always will be. If it started as a banshee and the inspiration was from a banshee I'm good with it being a banshee. plus i'm a little drnk ahahaha....but seriously lol. Quote
nomad Posted June 2, 2007 Report Posted June 2, 2007 (edited) It's only a Banshee if it has a twin 2 stroke (any displacement) and the radiator setup looks like an old washboard. Edited June 2, 2007 by nomad Quote
KaosBanshee44 Posted June 2, 2007 Report Posted June 2, 2007 It's only a Banshee if it has a twin 2 stroke (any displacement) and the radiator setup looks like an old washboard. Well put ! Quote
shanYE west Posted June 2, 2007 Report Posted June 2, 2007 I would have to say as long as its the stock frame (modified or not) and the motor is banshee based its still a "Banshee" but as long as its banshee powered.. I'll still say its a banshee. If you took a corvette motor and put it in a dune buggy would you still say its a vette? But on the oppisite side of the coin.... If you put a different engine in a vette.. would you still call it vette? In the long run.. its all in the eye of the beholder. Quote
RagunCajun Posted June 2, 2007 Author Report Posted June 2, 2007 If you took a corvette motor and put it in a dune buggy would you still say its a vette? But on the oppisite side of the coin.... If you put a different engine in a vette.. would you still call it vette? I like the you put that. I agree. On the same note as what some of you said, i really like how some people modify excisting parts to make something insane. Quote
. Posted June 3, 2007 Report Posted June 3, 2007 As long as you can still put banshee plastic on it, and a banshee engine in it (even in the case of the bottom end being changed and machined to be triple cylinder) its still a banshee Frame shouldnt matter, aftermarket frames are built for all sorts of different environments I know I wouldnt mind having a 250R geometry frame. It ends up using all 250R chassis parts, banshee radiator, plastic, and engine. You look at it and it still looks like a banshee but something just seems meaner. Go to an atv drag race. Watch all the quads pull up to the line. A banshee pulls up with a drag chassis and you arent going to call it a banshee? Quote
locogato11283 Posted June 3, 2007 Report Posted June 3, 2007 you know its still a banshee when you get on it and nail the throttle and you dookie in your shorts!! :biggrin: Quote
Snopczynski Posted June 3, 2007 Report Posted June 3, 2007 I would say its not a banshee anymore when it does not incorporate any stock or aftermarket parts in at least 50% of the bike. Quote
NYUK Posted June 3, 2007 Report Posted June 3, 2007 some banshee snobs huh.i like em stock, modified,stretched, lowered,raised, extended,shortened,blown up, running,in milk crates, dresser drawers, ect.don`t matter how they come to me.i like them any wich way. Quote
casper Posted June 3, 2007 Report Posted June 3, 2007 some banshee snobs huh.i like em stock, modified,stretched, lowered,raised, extended,shortened,blown up, running,in milk crates, dresser drawers, ect.don`t matter how they come to me.i like them any wich way. Im with NYUK on this one... Word. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.