Can I keep up?

[Chape]

I got a buddy of mine who has a 421 Cub kit in his shee my mods are what are in my signiture what are the odds of us being a good race or is he gonna totaly blow me away.

 

He has everything i have but the carbs and i run 19 domes he runs 22 domes. should i even bother or will it be not a total knock out

[Jhughes7]

Equal riders and properly tuned, He will walk you pretty bad.

[5150banshee]

depending on the riding skills and how well the bikes r tunned,if both bike are tuned nicely and he is a good rider then u might get a run for your money.

[91banshee]

I got a buddy of mine who has a 421 Cub kit in his shee my mods are what are in my signiture what are the odds of us being a good race or is he gonna totaly blow me away.

 

He has everything i have but the carbs and i run 19 domes he runs 22 domes. should i even bother or will it be not a total knock out

dust googles woud be advised , unless he dosent get good traction then you will need dust googles when he does

[shanYE west]

Since your motor is unported and the only real motor mod you got done is the crank with a plate. I'd have to say he's gonna spank you pretty good.

[dajogejr]

especially since you're running 8 paddle extremes on an 8 over arm...I'd bet you're spinning like a bitch...

Yeah, if you have no porting work...and that 2 into 1 carb...he should be walking you pretty bad unless he can't shift and/or can't ride.

 

Porting is the key...my man.

[locogato11283]

you gonna get worked..

[Animalman294]

Well I think you are going to get spanked.............

 

I mean you are putting a 421 up against a 373, and there is no replacement for displacement.

 

But then again it all doesn't depend on motor alone, and the other variables will go into play. Just run him and find out.................

[dajogejr]

Well I think you are going to get spanked.............

 

I mean you are putting a 421 up against a 373, and there is no replacement for displacement.

 

But then again it all doesn't depend on motor alone, and the other variables will go into play. Just run him and find out.................

 

I wouldn't go that far on the displacement thing. I've seen plenty good running 350s' give 4 mile (421 cubs) fits at the strip. They were just ported very, very well and tuned in right.

 

Porting is the power in two stroke world...there is no doubt.

[Animalman294]

Agreed................ :biggrin:

[Chape]

i wasnt exspecting to beat him just wondering how close it would be lol. I plan on getting a nice port job done after memorial day weekend. then during winter get a 421 my self lol thanks for the info guys. ill be buying a new set of dust goggles.

[06BaNsHeE]

i wasnt exspecting to beat him just wondering how close it would be lol. I plan on getting a nice port job done after memorial day weekend. then during winter get a 421 my self lol thanks for the info guys. ill be buying a new set of dust goggles.

 

 

Displacement Aint shit.Look at Dynodon.He has a lil baby 4mm.And I hear he give everyone a run for there money.

[06BaNsHeE]

before you do anything.Sell that 2-1 and get some duals.you already have the 4mm right?Cubs are 900 with pistons and you can get a clean-up probabaly free.Dont waste your money on porting IMO just get 68mm cub for a 4mm crank.

[dynodon]

I would have to say porting is the KEY as well !!! 06banshee dont think for a minute that mine isnt ported !!!! the porting in my motor is the only reason I can outrun the 535 guys period.

I am 240lbs with a 4 mil, yes its a drag chassis, but porting is the key and Nate has done well with it !!

 

Cutngrs will tell ya, he has seen my motor more than I have. ITS PORTED !!!! That 610 gets WORRIED every time we line up !

[Wicked98Shee]

LOL that cub will work ya like a lil school girl ........