vtecjun Posted May 5, 2007 Report Posted May 5, 2007 That stock Banshee swingarm looks really familiar :wink: Quote
XxMeltIcexX Posted May 6, 2007 Report Posted May 6, 2007 would be very interested if you had pictures of a finished banshee arm... i'll try it out and let everyone else know about it on the BHQ - I'll be the guinea pig lmao... Eric Quote
jamesbrokman1 Posted May 6, 2007 Author Report Posted May 6, 2007 would be very interested if you had pictures of a finished banshee arm... i'll try it out and let everyone else know about it on the BHQ - I'll be the guinea pig lmao... Eric Yea i am trying to get a finished pic, the darn company that is doing my lazer cutting hsa been really slow but as soon as i get those brackets i can tig em together and have a finished product, also does that stock swing arm look familiar is it yours? Quote
r/atvshee Posted May 6, 2007 Report Posted May 6, 2007 (edited) Can you do a radiused (curved, angled, ect.) swingarm? :biggrin: Edited May 6, 2007 by r/atvshee Quote
jamesbrokman1 Posted May 6, 2007 Author Report Posted May 6, 2007 Can you do a radiused (curved, angled, ect.) swingarm? :biggrin: Sure i can but it will cost extra as i have to roll the tubing to make a radius Quote
XxMeltIcexX Posted May 6, 2007 Report Posted May 6, 2007 Yea i am trying to get a finished pic, the darn company that is doing my lazer cutting hsa been really slow but as soon as i get those brackets i can tig em together and have a finished product, also does that stock swing arm look familiar is it yours? It looks like a stock banshee swinger :biggrin: Whats the question your asking? Quote
r/atvshee Posted May 7, 2007 Report Posted May 7, 2007 Sure i can but it will cost extra as i have to roll the tubing to make a radius How much extra for say a +8. Also what size/kind of tubing? Quote
jamesbrokman1 Posted May 7, 2007 Author Report Posted May 7, 2007 How much extra for say a +8. Also what size/kind of tubing? On a radiused swingarm you would have to send me a pic to show me exactly what you want, just go into paintbrush and draw a picture and send it to [email protected]. I cant give you an exact price without seeing exactly what you want . And for material i can use a mild steel rectangle tube or 4130 chrome moly but will be extra for chrome moly as the price is about $23 per foot for a 1'' x 2'' tube and also to roll the tube it must be a rectangle tube because it retains it shape and strength better than an oval or round tube. Also stock or round housing? Quote
r/atvshee Posted May 7, 2007 Report Posted May 7, 2007 On a radiused swingarm you would have to send me a pic to show me exactly what you want, just go into paintbrush and draw a picture and send it to [email protected]. I cant give you an exact price without seeing exactly what you want . And for material i can use a mild steel rectangle tube or 4130 chrome moly but will be extra for chrome moly as the price is about $23 per foot for a 1'' x 2'' tube and also to roll the tube it must be a rectangle tube because it retains it shape and strength better than an oval or round tube. Also stock or round housing? Rectangle tubing, dang. I was hoping for something along the lines of this. I know that these arent the strongest, but then again all i do is hillshoot and drag. Quote
jamesbrokman1 Posted May 7, 2007 Author Report Posted May 7, 2007 (edited) I can do that, we do have round dies for round tubing Round housing i take it? Also my jig has the shock mounts setup for the linkage, can you get me measurements for the shock mounts for just a straight shock mount? Edited May 7, 2007 by jamesbrokman1 Quote
jamesbrokman1 Posted May 7, 2007 Author Report Posted May 7, 2007 Also for that style i would have to use a 1'' x .120 wall chrome moly round so it would be as strong as possible which i do have a couple hundred feet of that material in stock, Quote
ClimbAnyHill Posted May 8, 2007 Report Posted May 8, 2007 That's looks pretty damn good so far :thumbsup: Can you lazer cut a design in the carrier area, like an Iron Cross or Spade etc ? Thanks. Quote
Capone Posted May 8, 2007 Report Posted May 8, 2007 Build a rep on this site. Keep your customers happy, shipments on time, products quality, and you will be getting more referals than you know what to do with. Goodluck, looks like you have very nice things going on over there. Someone needs to get one and post what you think! Quote
r/atvshee Posted May 8, 2007 Report Posted May 8, 2007 That's looks pretty damn good so far :thumbsup: Can you lazer cut a design in the carrier area, like an Iron Cross or Spade etc ? Thanks. Yes. he told me that the carrier housing needs to be sent out. Very good price on the swingarm im looking for too. :thumbsup: Quote
XxMeltIcexX Posted May 8, 2007 Report Posted May 8, 2007 Build a rep on this site. Keep your customers happy, shipments on time, products quality, and you will be getting more referals than you know what to do with. Goodluck, looks like you have very nice things going on over there. Someone needs to get one and post what you think! Thats what i said, i'll try one out for free (its my life on the line right?), and let everyone know... not such a bad idea right? :biggrin: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.