coil

[chevrolet banshee]

well i went on a ride yesterday and the banshee wos acting funy so i got 2 new plugs and it had a veary weak spark so i think the coil is done. my qustion is how makes the best coil :thumbsup: ricky stator seams vearey good but is thear betor

 

Edited April 10, 2007 by chevrolet banshee

[locogato11283]

i just use a stock one.. :shrug:

[Bansh-eman]

nology makes a stronger spark... but stock works fine... i know of plenty of guys that run stock on fullblown alky drag bikes

[chevrolet banshee]

ok a stock on will be fine then

[FireHead]

nology makes a stronger spark... but stock works fine... i know of plenty of guys that run stock on fullblown alky drag bikes

Word. :thumbsup:

[BigRed350x]

I will only put stock coil on my bike. I've had too many bad experiences with ricky stator in the past.

[chevrolet banshee]

ya i think stock is cheper to

[jbooker82]

I Run a nology Coil with Nology Hot Wires. The nice thing about it is you can change plug wires. The coil has 2 terminals that you snap the spark plug wires on to. It is like automobies. You dont have to run the Nology Wires. You could make you a couple of MSD SuperConductor plug wires if you wanted.

 

Talk to jeff at FAST he has the best price on the coil and hot wires. Most places sell the hot wires at 75 bucks a pop. Plus a nother 100 for the coil.

 

Jeffs entire package is 145. I have checked in to other places that claim to sell the same kit for a little cheaper. They dont give you Hot Wires. Just a generic plug wire. You have to ground the hot wires to the cylinder head. Just take a nut off and put the ring terminal under it and retorque it down.

http://www.farmandsandtoys.com/partdetail.asp?partid=46