blaster105 Posted May 27, 2007 Report Posted May 27, 2007 hey all kinda new here but i am also gettin ready to set up for 1/4 mile run , i have a 430 bigbore motor runnin on race gas , as for rear tires i am gonna be runnin 59x10x10 gearin as of right now i have 17 to 39 in the rear and skinnys in the front it is also lowered . what would be the best gearin for the 1/4 mile Quote
yfzdunejumper Posted June 7, 2007 Report Posted June 7, 2007 hey all kinda new here but i am also gettin ready to set up for 1/4 mile run , i have a 430 bigbore motor runnin on race gas , as for rear tires i am gonna be runnin 59x10x10 gearin as of right now i have 17 to 39 in the rear and skinnys in the front it is also lowered . what would be the best gearin for the 1/4 mile Alot more than that I ran out of gear last night with 17/39 on the 1/8 on a 443cc Quote
bansheeboy02 Posted June 19, 2007 Report Posted June 19, 2007 ON my old motor (SoCalinit has it now) I ran a best of 4.7 in 300 sand, 4.9 consistent.4 mil cub on race gas, stock gearing, NO Override, NO Lockup Clutch, stock full frame. I expect with a cut frame, lockup and override tranny, I could've hit 4.4 to 4.5 or so, maybe with a little alky. I'm expecting 4.1's to 4.2's with my new 10 mil cub build.... Also, I'm 250 lbs, I don't believe in Jockeys..... I ran a 4.8 4.9 consistant on hard pack with level 2 port, stock stoke, stock cylinders, stock tranny, stock frame, just lowered. Quote
10second Banshee Posted July 31, 2007 Report Posted July 31, 2007 June 24 2007 at Cedar Falls,Iowa NHRA track. 10.38 at 119mph in the 1/4 mile. The motor is a unported 710cc 20mm stroker D/M. 123hp with 70lbs of torque at the rear tires. The dragger weighs at 300lbs. Me weighs at 240lbs. That is the fastest e.t. time recorded on a 20mm D/M motor at any NHRA track. Quote
BAMA07 Posted August 6, 2007 Report Posted August 6, 2007 9.00 was my best time yesterday on my shee with t5s,vfrorce3s,and filter. My buddy's piped yfz best time was 8.65. thats on the 1/8th mile. Quote
375hp banshees Posted August 7, 2007 Report Posted August 7, 2007 9.00 was my best time yesterday on my shee with t5s,vfrorce3s,and filter. My buddy's piped yfz best time was 8.65. thats on the 1/8th mile. what tires? Quote
snowmanzz13 Posted August 7, 2007 Report Posted August 7, 2007 i ran mid to high 9's saturday night on my basically stock shee in the 1/8th would have been better if i could have hooked up, t5 pipes jetted for the pipes, k&n filter w/ outer wear, damn trac stars don't like that ashpalt Quote
yfzdunejumper Posted August 8, 2007 Report Posted August 8, 2007 6.703 at 98 on the 1/8 but that was real fat and I am going to play with the gearing a little hope to hit 6.5 next time. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.