peterlocal22 Posted September 17, 2006 Report Share Posted September 17, 2006 ok you guys talked me into it. im keeping the protaper bars but i need to find a new spot for my ingnition and key. give me some ideas. i know alot of you have it hidden in some pretty cool spots so help me out. pics would be great and any tips are welcome. thanks for always helping me out peter Quote Link to comment Share on other sites More sharing options...
Banshee_19 Posted September 17, 2006 Report Share Posted September 17, 2006 I have moved my key to the left side of my quad. It fits perfect into the hole where the front bolt for your fuel tank goes, Thats where I have mine!! Works good and looks even better. Quote Link to comment Share on other sites More sharing options...
chase@miamiatv.com Posted September 17, 2006 Report Share Posted September 17, 2006 i seen some preety intresting key rigs, most reasonble is bypassing it second is , hide a key billet clamp crap third is , bypassing it , however hiding a toggle switch. for a on/off ......... my buddy used to hide his between the actual front lower fender plastic , and the gas tank. Never saw exactly how he glued it or rigged it , thats where it was. epoxy works wonders billet bar clamp with key. drill hole and mount it in plastics. fourth :I have a ghetto tether on my old shee , i wired the key switch backwards ...... so when the key is in the off position the bike will start ( with or without key ), and the on position would turn the bike off. Needless to say if you have ure key swithc on plastics , just tie a string to the key...... u fall off it turns off. Happend to me when i was trying to hydroplane a mud put like a moron......... you asked. Just my opinion ..... Quote Link to comment Share on other sites More sharing options...
mybadbanshee Posted September 17, 2006 Report Share Posted September 17, 2006 my key is electrical taped to the ignition and stuffed instide the grill.pretty high tech huh? Quote Link to comment Share on other sites More sharing options...
Hilarious Posted September 17, 2006 Report Share Posted September 17, 2006 Modquad hide-a-key. Looks better than a zip tie or electrical tape. Quote Link to comment Share on other sites More sharing options...
BansheeCJ3 Posted September 17, 2006 Report Share Posted September 17, 2006 (edited) Here's another like the one above that the guy made who had the quad before me. Edited September 17, 2006 by BansheeCJ3 Quote Link to comment Share on other sites More sharing options...
ClimbAnyHill Posted September 17, 2006 Report Share Posted September 17, 2006 Mod quad billet bar is the way. Go to metal yard if you don't care about appearance. For a few bux they'll give you a piece of metal you can cut down and drill into. Quote Link to comment Share on other sites More sharing options...
Animalman294 Posted September 18, 2006 Report Share Posted September 18, 2006 Right behind the gas tank is a good spot, but it semms like it would be a pain in the ass to lift the seat off every time you needed to do something with the key................. :beer: Quote Link to comment Share on other sites More sharing options...
ClimbAnyHill Posted September 19, 2006 Report Share Posted September 19, 2006 fuk it, a kill switch that will replace the ignition from harness. Quote Link to comment Share on other sites More sharing options...
firefighterjosh Posted September 19, 2006 Report Share Posted September 19, 2006 I just cut the wires and sodered them together above the plug. So if I ever leave it somewere I can just unplug it and wayla no one can start it. Quote Link to comment Share on other sites More sharing options...
greencoloredride Posted September 19, 2006 Report Share Posted September 19, 2006 I just cut the wires and sodered them together above the plug. So if I ever leave it somewere I can just unplug it and wayla no one can start it. ^x2 Quote Link to comment Share on other sites More sharing options...
sand4ever Posted September 20, 2006 Report Share Posted September 20, 2006 I took a piece of angle and placed it between the air box hanger holder, then had it chromed. It is out of the way, but still can be used without removing the seat. I will get a pic if you want. Quote Link to comment Share on other sites More sharing options...
thegroup Posted September 20, 2006 Report Share Posted September 20, 2006 a wire on my key switch busted so i just unpluged it, wired the wires together, but kept the key switch on. ill evenually get a new one, but for now this will work. ill just have to keep my eye on my 'shee in a crowd Quote Link to comment Share on other sites More sharing options...
ClimbAnyHill Posted September 20, 2006 Report Share Posted September 20, 2006 I took a piece of angle and placed it between the air box hanger holder, then had it chromed. It is out of the way, but still can be used without removing the seat. I will get a pic if you want. yeah, let see it. Quote Link to comment Share on other sites More sharing options...
sand4ever Posted September 21, 2006 Report Share Posted September 21, 2006 Here is the pic of my key holder below the seat. What do you think? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.