firefighterjosh

I like that!

I have a EZ Go Shuttle Golf Cart. 36V, batteries are good. Has tail/brake lights and stock wiring up front for the headlight rear seat kit top windshield some bads scuffed up body rear tires are pretty much bald Just needs cleaned up Will sell or trade Selling price as is - $1800 Selling price when I fix it up $2500. Can text pics 260-610-2610

I have a R1 rhino project that i decided not to finish. I have a offroad Jeep and 4x4 quad as my projects now. here is a link to some info with pics http://www.minibuggy.net/forum/sale/15094-rhino-tube-frame-r1-engine-project-been-sitting-2-years.html

Its out of a Twin peaks 700/Prairie 700 (same thing). I bought it off of kawieriders.com Should make around 60 RWHP. Im still debating on selling it as it don't need much more work, but I got on a banshee kick lol

I have a Suzuki King quad that I have put a V-twin out of a twin peaks in. The engine is a 730 Kit from fundy. It still needs finished. Some misc wiring needs done, drive shafts, exhaust, throttle cable, air box and a few other things. If someone is interested I can go into more details. I will separate the engine and chassis. Asking.. Engine $2k Chassis $2k Whole $3500 Im looking for a really nice banshee or a banshee + cash or to sell it outright. Im not 100% sure if I want to do this but its worth a shot. Couple pics....has had some other work done since these.

Bump - started the parting out process of the KFX400 - mainly a engine with a rolling chassis.

Without a airbox I would only need to raise the frame 2 inches. but the banshee frame is a lot straighter and would be easier to make it look "stock"

I'll have to think about it. I got a lot more offers then I though I would lol I'll have to see which one I want. I started tearing down the Z400 last night to start parting out and I am still thinking of using that chassis. It seems a lot bigger

[email protected] is my email Thanks

Thanks, I looked into them a little bit and they seem to keep there value a little too much.

Wow thats a good deal! I already have the street bike engine and all the goodies. But I could sell that for almost the cost of that banshee!

ok let me know I have a Z400 I am thinking of using as a donor but I kind of want to keep it Yamaha with Yamaha type thing. Plus I miss my old banshee lol

ok thanks, Frame is tempting but I would prefer something with a arms, and swing arm as I am too lazy to make them haha

I would prefer a roller, or atleast something with hubs, swing arm. I could make my own a arms if I had too. Let me know pricing on both

Im looking for a Cheap Banshee to stuff a street bike engine into.

2006 King Quad 700 4x4 - Well taken care of, I used to race this machine and it had a built engine in it. I sold the engine and picked up a stock engine. What do you know, the engine smokes. I think it needs rings or the valves are bad. It runs good, but smokes like a diesel until its warmed up. Asking $3500 2003 KFX 400 - Ran good, needs some TLC to get her back up and running. It was wrecked by the GF and she has not rode it much since. It has brand new plastic on it, but no headlight otherwise I have fixed everything else. I have not ran it for 2+ years. Asking $2200 Pics to come

I am wanting a smaller quad, something like a 250ex, wolverine, rancher for my race ready 400ex. I would also like cash with the deal. www.zabeard.com/josh is my pics. Location fort wayne indiana Thanks I can get more into details if your intersted

I am looking for a set of front banshee shocks. I want aftermarket with rezzies shipped to 46725. I will be getting these revavled and cleaned up, so they don't have to be in perfect shape. Thanks Josh

Quad magazine is the best IMO All the others are fun to look at pictures and read some of the articles but dont base you decisions off of them

like others say they do not bend just break. You prabably bent something else.

July 22nd, in Attica Indiana the Badlands and Indiana Cross Country Racing series will be putting on a XC race. Bikes start in the morning. Side x Side racing, quads in the Afternoon, $1,000 Pro purse, Holeshot awards for all classes, sponsored by Yamaha. Check out www.ixcr.com for more info, click on the forums for info. This is a NON AMA EVENT! Which means you do not need to pay for a membership! $25 to race and $15 to get in. Only the North part of the park will be shut down for the race. Should be a great time I will be racing the ute class.

Bah never. No Crap Am for me. I am not anti Can am lol. Really I like the riders who race them. Rick Cecco is so fast even in the dry, if it wast for Penland's team I would have never gave ute racing a try. But I do not like how the 800s handle, they just feel big to me. I hope to try a GNCC soon. Maybe crawfordsville. But I think I am going to race the badlands race july 22nd.

I am glad to see some utes on the podium!

Handling wise when I raced my shee in XC was Shocks, rebuilt rear stocker and +1 stem with CR high bend bars. That all I really did and Razr tires

^^LMAO If you ride alot of tracks I suggest -1