VIPES Posted August 9, 2006 Report Posted August 9, 2006 CAN ANY ONE PLEASE RECOMMEND WHAT SIZE JETS TO USE FOR MY BANSHEE. I FRIEND SAYS 350 AND ANOTHER SAYS 220. ANY OTHER SUGGESTIONS? Quote
Tim C Posted August 9, 2006 Report Posted August 9, 2006 Whats your elevation, temperature and any mods to the air filter/box. With no other mods and if your close to sealevel you should probably be around 270 - 280 mains Quote
csrmel Posted August 9, 2006 Report Posted August 9, 2006 toomey recomends 280 mains, stock idles and a toomey/dynojet needle. you can use the stock needle though. Quote
VIPES Posted August 10, 2006 Author Report Posted August 10, 2006 Whats your elevation, temperature and any mods to the air filter/box. With no other mods and if your close to sealevel you should probably be around 270 - 280 mains I live in Los Angeles. I ride at Pismo Beach (sea level) and Glamis (??? elev.) The mods I have are only the toomey's T-5 and K&N air filter with no air box. Other than that it is pretty much stock. Quote
ellison445 Posted August 10, 2006 Report Posted August 10, 2006 290-300 with those K&Ns, Do a plug chop as well! I live in Los Angeles. I ride at Pismo Beach (sea level) and Glamis (??? elev.) The mods I have are only the toomey's T-5 and K&N air filter with no air box. Other than that it is pretty much stock. Quote
crazybluerider Posted August 11, 2006 Report Posted August 11, 2006 I had 290s with LRD needles (dynojet) at sea level with just pipes and pods. I have LRD pipes but jetting should be close to the same. Quote
dajogejr Posted August 11, 2006 Report Posted August 11, 2006 T5's, no air box...just K&N...330 to 350. Unless Pismo and Glamis are more than 1000 ft or so... If so, start at 350 and subtract 10 for every 1000ft about sea level... Quote
J-Madd Posted August 11, 2006 Report Posted August 11, 2006 T5's, no air box...just K&N...330 to 350. Unless Pismo and Glamis are more than 1000 ft or so... If so, start at 350 and subtract 10 for every 1000ft about sea level... I agree. On my stocker w/ similar mods (except I still have a box/no lid.) I've ran 340s to 360s at 300ft and 95+ temp. Fouled plugs w/ 360s, runs great w/340s. When the temp falls, I'll put 350s or 360s back in. Quote
milo_32000 Posted August 13, 2006 Report Posted August 13, 2006 Hope this will help, Stock motor, PC pipes, no air box lid, 270 mains are dead on, in fact if I put the air box lid on it bogs, I`m 140' above sea level , Milo_32000 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.