94BANSHEE Posted April 22, 2006 Report Posted April 22, 2006 for a good , one-step up, bore? i blew my shee up and i have to get it bored from 0.20 to 0.30 over. nothing serious. ordered some wisecos and just looking for a place to do it. i got a quote at one place, but i thought i'd ask on here what most of you guys pay for a normal straight foward bore and nothing else, except maybe the stock head shaved a little i'd like to see if the price i got was fair thx Quote
rocketboy Posted April 22, 2006 Report Posted April 22, 2006 50$ a hole and head milling should be 40$ , Quote
batoutofshell Posted April 22, 2006 Report Posted April 22, 2006 259 for boring and the psistons Quote
lowriderb Posted April 22, 2006 Report Posted April 22, 2006 tipically around 40-50 a hole.. the head being only milled about 35.. and 90 for it to be cut and rechambered (with a much better combustion chamber).. Quote
hittintrees srh Posted April 23, 2006 Report Posted April 23, 2006 damn, all you guys get pretty good deals-a motor builder near my hose just charged by buddy $300 just bore his juggs-shitty deal Quote
steveodo Posted April 23, 2006 Report Posted April 23, 2006 shoot id send mine out thats way to much. mine were 40 a hole an i went 60 thousands. . world class motersports did mine. Quote
woodro77 Posted April 23, 2006 Report Posted April 23, 2006 i just did my motor and a shop charged 300 for boring both cylinders, complete gasket set and weisco pistons , rings , wristpin bearings Quote
BKOLFO4 Posted April 23, 2006 Report Posted April 23, 2006 I just bought a wiseco kit with top end gaskets and wrist pin bearings for $160 including shipping from ebay. RB Racing is charging me $80 to bore both jugs (had him do it since I sent them for porting). Locally, they wanted $100 to bore. Brian Quote
CowboyBanshee Posted April 23, 2006 Report Posted April 23, 2006 fourty to fivety a jug is a typical price around here, don't sacrifice price for quality. Quote
fastbanshee4u Posted April 23, 2006 Report Posted April 23, 2006 Just paid $160 with shipping, for complete top end from Moto Man out of Michigan.$50 for bore both cylinders at local race car engine builder. Thats $210 for a complete top end rebuild,not a dime more. Quote
chris642 Posted April 23, 2006 Report Posted April 23, 2006 Jim at passion racing does both cylinders for $55, give him a call. www.Passionracingengines.com Quote
laramik Posted May 3, 2006 Report Posted May 3, 2006 Matter of fact if you order a port from him at the same time he will do the boring for free. Top end kit is 179 from him as well. I am getting an mx port for 399 and the top end for about 600. Should be pushin about 80 rwhp according to jim. Quote
blueshee03 Posted May 4, 2006 Report Posted May 4, 2006 (edited) jim is a super guy to talk and deal with .he takes a lot pride in his work.every motor he has done for us has run super. Edited May 4, 2006 by blueshee03 Quote
banshee332 Posted May 4, 2006 Report Posted May 4, 2006 jim is a super guy to talk and deal with .he takes a lot pride in his work.every motor he has done for us has run super. 511594[/snapback] Same here no problems with jim. good guy and awsome builder. Quote
strokrbanshee1 Posted May 4, 2006 Report Posted May 4, 2006 I would give Jeff at FAST a call 785 364 5325... check prices and with his customers... Jeff will do you right... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.