Help Final parts for Cub Motor build.

[harley_sr]

Ok, I am trying to make sure I have every thing needed. Here is a list of what I have for the motor build up right now..

 

421 Cheetah Cub w/ 4 mil crank

CPI InFrame Pipes

35mm PWK's w/ extra jets

V-Force III Reeds

Adj Timing Plate

Noss Machince Head w/ his 20cc Domes

Sidewinder TiMoly 17/42 sprockets and Chain

+4 swingerarm

 

 

Now I was looking into may a set of FTZ Intakes, and maybe a pingle fule valve. Now when I was reading about the intakes, they said that the cross over tube should be used with motors under 450cc??? What do you guys think??

 

Also I am trying to figure oput what would be a good filter setup.. Please help.. I need the parts asap. Thanks!!

[banshee350twin]

U got manifold's ?

[bansheeseat$$]

Ok, I am trying to make sure I have every thing needed. Here is a list of what I have for the motor build up right now..

 

421 Cheetah Cub w/ 4 mil crank

CPI InFrame Pipes

35mm PWK's w/ extra jets

V-Force III Reeds

Adj Timing Plate

Noss Machince Head w/ his 20cc Domes

Sidewinder TiMoly 17/42 sprockets and Chain

+4 swingerarm

Now I was looking into may a set of FTZ Intakes, and maybe a pingle fule valve. Now when I was reading about the intakes, they said that the cross over tube should be used with motors under 450cc??? What do you guys think??

 

Also I am trying to figure oput what would be a good filter setup.. Please help.. I need the parts asap. Thanks!!

500810[/snapback]

Pingel for sure and a pair of k&n clamp on filters

[Hilarious]

What about an aluminum high flow water pump impeller?

What kind of clutch are you going with?

[FasterThanU90]

Yah ur gonna need a heavy clutch with that or if ur willing to put out the money u can run a lockup .

[harley_sr]

what is a good clutch set up to run?

[ogre03]

PM Jeff from F.A.S.T. (fastoys on here) he'll be more than happy to help you out with advice, parts or whatever you need.

[trex banshee]

Now when I was reading about the intakes, they said that the cross over tube should be used with motors under 450cc??? What do you guys think??

 

500810[/snapback]

 

 

mine is just a 400 and i dont run a cross over tube and i am sure their are plenty other people who don't as well and have smaller engines then me.for example a drag ported 350.

[lowriderb]

your probably going to want to run a little bit longer arm as well..

[FASTOYS]

Hey Harleysr, Might check with that guy you got your pipes from as im sure he is a one stop shop for all that you need and has it on hand ! hint hint

 

P.S. I just checked your tracking # and You should recieve your CPIs today !

[rsheppick]

Hey Harleysr, Might check with that guy you got your pipes from as im sure he is a one stop shop for all that you need and has it on hand ! hint hint

 

P.S. I just checked your tracking # and  You should recieve your CPIs today ! 

500934[/snapback]

[bigboybanshee]

i am sure their are plenty other people who don't as well and have smaller engines then me.for example a drag ported 350.

500885[/snapback]

 

Like mine

 

I haven't had any problems so far!!

[Ducman]

Couple of things I neglected to order untill after I got the cub cylinders and then realized I needed, new head studs and big bore o-rings for the 68 mm bore domes, and an overtime check so I could afford food for the rest of the month, J/K on the last one, well sort of.

[harley_sr]

Hey Harleysr, Might check with that guy you got your pipes from as im sure he is a one stop shop for all that you need and has it on hand ! hint hint

 

P.S. I just checked your tracking # and  You should recieve your CPIs today ! 

500934[/snapback]

 

 

Got the today.. I did not want to call and bother you with a lot of questions, I know your busy.. Thanks!