Amsoil full syn. pre-mix, What Ratio?

[letsgetthisdone]

The tech guy at Amsoil said to run it at 50:1 cuz that is what thier race teams run. But I am not running a one roce motor so, ya. Do you guys think I should run 32:1 or 40:1. Mods are in my sig. Thanx.

[q-ball]

i run the amsoil at i think its 30 or 32:1 i do know its 13oz. to 5 gallons of gas. what grade fuel do you run? mine is setup to run best on 87 mixed at the above ratio. hope this helps.

[letsgetthisdone]

13oz per 5 gallons of gas is 50:1 and I run 91 octane.

[q-ball]

oh! i always did kinda suck at math!!! my bad! sorry

[brock_fuzzy_69]

it depends on which amsoil you have

 

the dominator oil is meant to be ran at 50

 

the sabre oil is anywhere between 50-100

 

i run sabre at 64 with no probs at all

[letsgetthisdone]

I have the Dominator stuff. I was running 50:1 but I turned a needle bearing into a solid sleeve that welded itself to the crank and rod.

[PUSH THE THROTTLE]

it depends on which amsoil you have

 

the dominator oil is meant to be ran at 50

 

the sabre oil is anywhere between 50-100

 

i run sabre at 64 with no probs at all

497427[/snapback]

Exactly.

 

I also run the Sabre but I mix it at 80:1 with no problems.

[DIRTMAN350]

I would run it at 32:1. That's just my 2 cents worth.

[md7571]

I run the amz dominator at 32:1. Bought my bike used, didnt really know what condition the engine was in. I have added bolt ons for 4 years now. Most of the guys I ride with mix at 40:1 or 50:1. I am the only one that has not burnt down or seized yet I have always had good luck with the 32:1 mixture in other machines as well. Oil is cheeper than frequent rebuilds!!

[Dead Op]

I run interceptor in my shee at 40:1 Ran Ams oil in my one sled 99 ZL since break in, It has 4,500 miles on it and still strong compression

[thack]

i run the amsoil synthetic injector oil at 50 to 1 and love it ran my 99 shee for 3 years with no problems