Dinner Posted April 3, 2006 Report Posted April 3, 2006 Hey, when i took my head off to paint it, i noticed that there is a whole in one of the domes, its about the size of the tip of a pen. Should i get a new head Quote
sheefreak Posted April 3, 2006 Report Posted April 3, 2006 Is it an actual hole, or like a divot from debree? Quote
DIRTMAN350 Posted April 3, 2006 Report Posted April 3, 2006 I would replace the head. There are several aftermarket companies out there that can help you out. I would drop a pm to dlnoss and he can help you out. I wouldn't chance using that head over again. Quote
Dinner Posted April 4, 2006 Author Report Posted April 4, 2006 Is it an actual hole, or like a divot from debree? 496690[/snapback] i can't see right through the head, so it could be from debree, i think ill get a new head though anyways Quote
biggun6ss Posted April 5, 2006 Report Posted April 5, 2006 i can't see right through the head, so it could be from debree, i think ill get a new head though anyways 497192[/snapback] Get a Noss head. easy to install and very clean looking. While you have your head off better check ring clearence and see if there are any scratches in the cylinder walls. If you had debree floating around it is always good to check. Quote
Dinner Posted April 5, 2006 Author Report Posted April 5, 2006 Yea its suppose to be warm this week so i think ill take at a look at it, i'm thinking its been there before i had hte new top end put in it cause it was pretty beat before Sorry for this dumb question, but what does NOSS stand for, something about new but stock isnt it And if im getting a new head, just wondering if i should get different size domes Stock Carbs, bored 65.5(364cc), DG pipes(stock silencers), Boost Bottle, 280 main, 25 pilots Thanks Dinner Quote
biggun6ss Posted April 6, 2006 Report Posted April 6, 2006 Don't know what it stands for. If you get small domes like 17cc it will up your compression and you might have to run race gas. I got the Noss head with some 20cc domes. At my elevation I am around 130 psi so I dont need race gas. Quote
racer Posted April 6, 2006 Report Posted April 6, 2006 well its the name of the dudes company for one thing, NOSS machine. May be his name too. Quote
Dinner Posted April 6, 2006 Author Report Posted April 6, 2006 Yea i got it confused I'm probably going to order one as soon as i find a good price around my place Quote
biggun6ss Posted April 6, 2006 Report Posted April 6, 2006 I got a blue anodized head with 20cc domes for 250. Quote
dlnoss Posted April 6, 2006 Report Posted April 6, 2006 Noss is my last name. I would have tried to think of a better name for the company but when I began, I wasn't doing end-customer work. -David Quote
23champ Posted April 6, 2006 Report Posted April 6, 2006 I think it sounds pretty cool, especially for performance parts! looks to me like you lucked out on having the last name Noss. Quote
Dinner Posted April 6, 2006 Author Report Posted April 6, 2006 I think it sounds pretty cool, especially for performance parts! looks to me like you lucked out on having the last name Noss. 498416[/snapback] Yea..."Yea i got NOSS on this thing" "Really " Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.