Hummah2 Posted March 22, 2006 Report Posted March 22, 2006 Can any1 post instructions on how to install the temp gauge that goes into the radiator line then hooks into the electrical. Im sure its pretty east but dont wanna mess it up.. Quote
RIPPEN Posted March 23, 2006 Report Posted March 23, 2006 http://www.bansheehq.com/forums/index.php?showtopic=57584 This is where I put mine.. To plumb into the the rad hose I just had a local welding shop weld a bung onto a piece of one inch pipe. I havn't wired mine yet but Iam probably gonna tie into the head light wires. I cant remember exactly what ones I was gonna tie into.... I think it was high beem wire(yellow) and then black on the other... Hope this helps And welcome to the HQ RIPPEN Quote
batoutofshell Posted March 23, 2006 Report Posted March 23, 2006 http://www.bansheehq.com/forums/index.php?showtopic=57584This is where I put mine.. To plumb into the the rad hose I just had a local welding shop weld a bung onto a piece of one inch pipe. I havn't wired mine yet but Iam probably gonna tie into the head light wires. I cant remember exactly what ones I was gonna tie into.... I think it was high beem wire(yellow) and then black on the other... Hope this helps And welcome to the HQ RIPPEN 491247[/snapback] ha ha ha ha he said bung hahahaha shut up beavis Quote
BLUE STREAK Posted March 23, 2006 Report Posted March 23, 2006 hay I have seen a temp gage built right in to the rad cap for auto motive applications I would do a google search I know I have seen them I just cant remember ware Quote
RIPPEN Posted March 23, 2006 Report Posted March 23, 2006 ha ha ha ha he said bung hahahaha shut up beavis 491309[/snapback] (slaps with a back hand) I said bung, not BUNG HOLE.... I knew when I wrote that it was only a matter of time. As for the temp guage on the rap cap thing i never heard of that... I have seen the one where you use a meat thermometer but I didn't want to put something on my bike that came from the poltry isle... RIPPEN Quote
DIRTMAN350 Posted March 24, 2006 Report Posted March 24, 2006 http://warpdriveperformance.com/index.htm Hey man check out this website. I run one on mine and have not had any prob's to speak off. The only drawback is that it is hard to see. The best gauge to install is a 1.5 inch liquid filled gauge. Otherwise needle will vibrate alot. Quote
Blue Duece Posted March 24, 2006 Report Posted March 24, 2006 i used a schock proof, it stays good and steady Quote
BLUE STREAK Posted March 24, 2006 Report Posted March 24, 2006 hear this is what i am talking about about $20 lots of colors and sizes I knew Id find them to see more go to http://www.jcwhitney.com/autoparts/Product...0010307/c-10101 Quote
warriorracer Posted March 24, 2006 Report Posted March 24, 2006 hear this is what i am talking about about $20 lots of colors and sizes I knew Id find them to see more go to http://www.jcwhitney.com/autoparts/Product...0010307/c-10101 491868[/snapback] Would any of them work? Quote
aczar Posted March 26, 2006 Report Posted March 26, 2006 These ones from Eddie Saunder Racing are pretty trick. http://www.esr250.com/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.