THEREALBUDLIGHTBANSHEE Posted December 3, 2005 Report Share Posted December 3, 2005 well going to sandtraxx tommarow to get my banshee dynoed,wondering what kind of hp its going produce.bike feels strong ,heres my mods drag port 19cc domes CPI inframe +5 timing VF2's 28mm keheins K&N pods weisco crank stock stroke runnig 110 ctane w/amsoil 50:1 take a guess,the weener gets 1 millon dollars,j/k.my guess is 72hp and ive only rode it for like 30 minutes.(hope thats enough breakin ) Quote Link to comment Share on other sites More sharing options...
8buck Posted December 3, 2005 Report Share Posted December 3, 2005 (edited) 60 I'm prolly WAY off. Let us know ASAP, I'm really curious! Post the chart too, I would like to see where the power hits with that port and the CPI pipes. Stock bore? Edited December 3, 2005 by 8buck Quote Link to comment Share on other sites More sharing options...
THEREALBUDLIGHTBANSHEE Posted December 3, 2005 Author Report Share Posted December 3, 2005 60 I'm prolly WAY off. Let us know ASAP! I'm really curious! Stock bore? 444348[/snapback] Yes stock bore weisco's Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted December 3, 2005 Report Share Posted December 3, 2005 im gonna guess 63 to 69hp... Quote Link to comment Share on other sites More sharing options...
rocketboy Posted December 3, 2005 Report Share Posted December 3, 2005 (edited) its all gonna depend on the port job ,if it is in fact a true drag port it should be well in the 70 hp range ,but im gonna guess 64 rwhp and 36 lbs of torque just for fun Edited December 3, 2005 by rocketboy Quote Link to comment Share on other sites More sharing options...
blueshee03 Posted December 3, 2005 Report Share Posted December 3, 2005 58hp , 39ft lbs torque throw in a stroker and try it again Quote Link to comment Share on other sites More sharing options...
THEREALBUDLIGHTBANSHEE Posted December 3, 2005 Author Report Share Posted December 3, 2005 58hp , 39ft lbs torque throw in a stroker and try it again 444353[/snapback] 58 i had that w/T5's stock carbs Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted December 3, 2005 Report Share Posted December 3, 2005 It's going to depend on the dyno you run it on as well. So I guess 63 HP sound about right if you switched to just switched to CPI's 28mm carbs are not much bigger... Quote Link to comment Share on other sites More sharing options...
sand rocket Posted December 3, 2005 Report Share Posted December 3, 2005 my guess is 68hp Quote Link to comment Share on other sites More sharing options...
lastlegwarrior Posted December 3, 2005 Report Share Posted December 3, 2005 well you guys outta know by now it's all gonna depend on how big his boost bottle is, if it's the oversized two liter version then we might see at least a 1000hp. Gosh i can't believe you all forgot about the boost bottle factor. Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted December 3, 2005 Report Share Posted December 3, 2005 66 Quote Link to comment Share on other sites More sharing options...
Big Blue Posted December 3, 2005 Report Share Posted December 3, 2005 (edited) 69hp and 34 torque is my guess, so what does the winner get? I need to make my way over there to get mine done sometime. Edited December 3, 2005 by Big Blue Quote Link to comment Share on other sites More sharing options...
bansheefreak Posted December 3, 2005 Report Share Posted December 3, 2005 my guess is 67hp Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted December 3, 2005 Report Share Posted December 3, 2005 68 HP Quote Link to comment Share on other sites More sharing options...
dawarriorman Posted December 3, 2005 Report Share Posted December 3, 2005 Im going to say 70.4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.