What SMALL trucks does a banshee fit in?

[Joshtruction]

If I am going out alone, it is a pain to load up the trailer for one quad. I am in the market for a small 4 cylender truck. Can anyone confim what small trucks a banshee can fit in? I don't care if the tailgate closes or is open (I know chances are it will have to be open unless the front wheels are on TOP of the cab)

[Cotton eyed Joe]

I had a 99 S-10 mine fit into and I could close the tail gate. This is with a stock length carrier, and I did have to hike the front end up over the fender wells.

I don't think it will fit in any small truck with step-side

[dawarriorman]

It should fit in anything thats fairly new. Mine fits in my 93 toyota, its a really tight fit, but it makes it. If I didn't have the toolbox, I could close the tailgate too. Unless you have extended a-arms, I wouldn't worry about it. Even then you could lift the front end over the wheel wells.

[scottt89]

This isn't exactly a smaller pickup, but I have an 04 new body style F150 SuperCrew and the bed is too small. It needs the Tailgate down to haul the Shee.

[Cannon]

Before I got my wife a quad I used to haul my Banshee in the back of my short bed 01' S-10.

It fit for length with the tailgate down but front wheels had to go over the trucks wheel wells to get it in there.

[fast87]

my banshee (+4 swingarm, +4 axle, all other suspension is stock) fits in the bed of my 89' toyota pickup, i lift the front wheels up on the roll bar support bars(one 3" bar on each side that goes from the top of the main roll bar to the top of the fender well) and ratchet em down to those bars, close the tailgate and it's secure, i'm even running 22" super swampers(wider than stock) with the wider axle and it fits snugly between the side of the bed, that's a small truck by ym standards and it fits great, BTW this is the newer style toyota, i'm not sure if it will fit in the older style toyota's..

 

~Mark~

[Banshee17Racing]

I've got a '98 reg. bed S-10 and the 'shee has always fit w/no problem. It fit perfect even when I had the stock swinger on it (it's a -2 now). I really didn't expect it to fit after the a-arms and axle, but it actually does with some room. It's a pain in the ass to do by yourself, but it fits.

I've got a bud w/a 97 stepside ranger, and a stock 400EX. Believe it or not he actually got it to fit in there, with all four wheels inside the bed!

[Joshtruction]

Lifting the tires over the wheel wells is expected. i was thinking early 90's mazda (pretty much a ranger) or an early 90's toyota. Just curious if I put 2" wider A arms if it will still fit width wise. I guess thats my main concern.

[chris642]

i have used a ford rancher a couple times, it was a little hard with the wheel wells but 2 people can get it in no problem.

[super88_banshee]

I don't think it will fit in any small truck with step-side

441504[/snapback]

 

You think right, but a 400ex will if you pull the wheels off!

[banshee0044]

1992 ranger xlt..stock just BARELY fits in between the wheel wells

[speed_demon]

I have an '89 dodge D-50 power ram and I have about 2 inches on each side and the tail gate closes but it touches on both the front and back, it's like it was made for my banshee

[BansheeBrian]

04 Ranger here and a stock shee is a squeeze.The wheel wells are a pain.If I went 2+1 on the arms,on the trailer it goes.

[flanders]

my banshee with a 6" extended swinger fits in my 2001 tacoma sr5. its a little rough gettin it in there if you're alone, but with two people, its easy cheese. tires touch the cab and tailgate.

[notch86]

I know it's not a compact as some of the others posted but mines fits in my dakota if I took the tool box out I could even close the tailgate with stock a-arms without having to pop it over the wheel wells but I'll have to once I get my extended ones and I apologize if I don't completely make sense I just got through working a 10 hr shift and 1 hr of sleep so I'll a lil out of it