Which one makes more H.P

[Turbobanshee_kid]

I have $300, I have stock reeds should I get V-force 2 or A noss machine cool head with 21cc domes? If I got 20cc domes would I have to welded the crank? I have 1.00mm over bore pistons right now. Should I get the reeds first?

 

THANK YOU GUYS!

[Turbobanshee_kid]

I am at sea level! 21cc domes would give me 156 and 20cc domes would give me 169

 

http://www.nossmachine.com/banshee_heads.htm

[speedfreak350]

stick with pro-design, you should have your crank welded any was eventually it will seperate no mater what you do to the bike.

[BigRed350x]

I would go with the Reeds. Will give you a little better throttle response. Do the head later when you have some more mods. That's just me though. Everyone is different. I went with reeds first, then head.

[Justintoxicated]

Neither will make much of a HP difference, and definately not the head...

 

The head will make your engine run cooler and give you more lowend if you get the correct domes. I also like the O-ring concept better than the gasket style.

 

The Reeds will make your throttle response more snappy and might add a HP or 2.

 

Personaly I would do the head first, and do the reeds when you change your carbs to something better down the road.

Edited November 3, 2005 by Justintoxicated

[dlnoss]

You don't need your crank welded for 21cc or 20cc. I run 19cc with a stock crank.

[BdBanshee]

The head will make a more noticable difference in HP.

[FASTOYS]

For $300.00 we could hook you up with a Pro Design or a Noss head and a timing plate for advancing your timing and that will definetly help your HP needs!!

A bone stock Banshee should have the crank welded as i have seen them come apart even in stock form !

[speedfreak350]

For $300.00  we could hook you up with a Pro Design or a Noss head  and  a  timing plate for advancing your timing and that will definetly help your HP needs!!

A bone stock Banshee should have the crank welded as i have seen them come apart even in  stock form !

432727[/snapback]

 

yeah they will come apart so do it before its too late, also go with the timing plate it helps alot, and go withthe pro design like i said before.

[Turbobanshee_kid]

I have the $80 timing plate

 

I think I am going to weld the crank to for $50 At a local shop?

 

And get reeds!

 

Should I get V-force 2 or 3's I plane no getting porting and cool head!

 

I have 1.00mm over bore pistons and T-5's and timing plate and boost bottle.

[odaen]

yikes, the timing plates are $35. you could get material taken off your head and a new set of reeds for your $300.

[PUSH THE THROTTLE]

If you do decide to get a head do yourself a favor and get a NOSS head.

[sheefreak]

If you do decide to get a head do yourself a favor and get a NOSS head.

432755[/snapback]

 

Second!

[locogato11283]

id get NOSS and VF2

[super88_banshee]

yikes, the timing plates are $35. 

432752[/snapback]

Haha, mine was free cuz i did it myself!