Drag pipes and port work

[Blackmon]

I am looking into getting drag pipes w/ mufflers and a port job over the winter..I haven't seen too many drag pipes with mufflers..but trinity seems to have the cheapest that I have found..are they decent and how do they compare to the others..and as for the port work..who does a good job and how much is it for a good drag port? Also I have read a few posts on the cheetah cylinders..I might be interested in getting those with a port job if I can afford it..Any suggestions are welcome..thanks in advance

[23champ]

Get the cubs. Good power for a decent price, and still reliable.

[Blackmon]

yes reliablity is definately another factor..i just have rebuilt my shee for the first time about a year ago and everything still looked really nice:) I was actually suprised because I had heard that 2 strokes usually had to be rebuilt more often and it had been 3 years of drag racing twice a week

[bigboybanshee]

A couple of good engine builders to call would be...

 

Andy at Grand River Racing (Banner ad is at the top of the page)

 

Jeff at FAST Racing (screen name is FASTOYS)

 

I got my cylinders ported by Andy @ GRR, VERY happy with the quality of his work, his drag port rips! I noticed you said you wanted drag pipes with silencers, you could always check into Andy's new inframe drag pipe

 

Jeff at FAST is simply a great guy to deal with...He can do portwork also, AND can get you setup with a cub if you want it. He's always around when you need him and more than willing to give you advice if you need it!

[locogato11283]

A couple of good engine builders to call would be...

 

Andy at Grand River Racing (Banner ad is at the top of the page)

 

Jeff at FAST Racing (screen name is FASTOYS)

 

I got my cylinders ported by Andy @ GRR, VERY happy with the quality of his work, his drag port rips! I noticed you said you wanted drag pipes with silencers, you could always check into Andy's new inframe drag pipe

 

Jeff at FAST is simply a great guy to deal with...He can do portwork also, AND can get you setup with a cub if you want it. He's always around when you need him and more than willing to give you advice if you need it! 

419721[/snapback]

i concur...

[odaen]

if you don't mind shipping your stuff...

 

 

redline racing, call cameron at 541.367.2453

 

he's the best guy i've ever delt with, have heard nothing but the same from anyone else.

[madkaw]

RDZ Racing new out of frame drag pipes with silencers

[rocketboy]

rdz is actually a shearer pipe and their porting is ridiculous expensive but they do a good job according to alot of peeps who ru ntheir stuff . dont waste your time and money porting stock jugs if you want a true drag port ...instead id do what i did ,and jus t buy a cheetah kit and be done with it IMHO

Edited October 1, 2005 by rocketboy

[FIRST BANSHEE]

rdz is actually a  shearer pipe  and their porting is ridiculous expensive but they do a good job according to alot of peeps who ru ntheir stuff  . dont waste your time and money  porting stock jugs  if you want a true drag port  ...instead id do what i did ,and jus t buy a cheetah kit   and be done with it IMHO

421773[/snapback]

rdz pipes are not the same as shearers,they pull a little higher. rob makes awesome power with stock cylinders, but you will get more with cubs plus more relibility. robs shit is very fast. good luck

[rocketboy]

i guess Matt shearer is a liar when he said to me its basically just his off the shelf production banshee inframe with their name stamped on it and yes alot of peeps on here and planet sand like rdz racing ,but dollar for dollar ,there just not gonna make the power a cub makes especially for their prices

Edited October 2, 2005 by rocketboy

[blueshee03]

in my oppinion i'd forget trinity,they don't do the quality they used to since they got a name.if you want awsome results and satisfaction try jim at passion racing.i doubt if you can find a better guy to talk to and deal with whether it's just questions or a full all out drag motor with pipes.

[1 BADSHEE]

I am looking into getting drag pipes w/ mufflers and a port job over the winter..I haven't seen too many drag pipes with mufflers..but trinity seems to have the cheapest that I have found..are they decent and how do they compare to the others..and as for the port work..who does a good job and how much is it for a good drag port?  Also I have read a few posts on the cheetah cylinders..I might be interested in getting those with a port job if I can afford it..Any suggestions are welcome..thanks in advance 

419519[/snapback]

i ve got drag pipes and i went through all kinds of brands and the best i ve found is shearers . they are alittle pricey but worth every penny. as far as silencers mine dont have any . as far as drag port i know this guy in san diego ca that did a killer job on mine . let me know if your interested

[bkabina]

Passion racing is the best price I found for Shearer's.$450. chrome outta frames.I would also recomend him for a port job.If you are looking for Cubs he can hook you up on those as well.I'm sure can match or beat just about anybody's price.

[rocketboy]

If you are looking for Cubs he can hook you up on those as well.I'm sure can match or beat just about anybody's price.

422036[/snapback]

 

 

he definitly hooked my ass up on a 65mm cheetah cub kit

[madkaw]

rdz is actually a  shearer pipe  and their porting is ridiculous expensive but they do a good job according to alot of peeps who ru ntheir stuff  . dont waste your time and money  porting stock jugs  if you want a true drag port  ...instead id do what i did ,and jus t buy a cheetah kit   and be done with it IMHO

421773[/snapback]

Thats interesting I guess when I was over at RDZ last week watching him weld pipe stampings together those where shearer pipes