WHERE TO GET DOMES?

[smokin350]

WHATS UP GUYS I WAS WONDERING IF ANYONE KNEW WHERE I COULD GET A SET OF DOMES MADE OR CUT I HAVE THE VITO'S MONOBLOCK SET-UP AND THEY ONLY HAVE 1 SET OF DOMES AND I WOULD LIKE TO GET DOMES THAT ARE 1 OR 2CC'S LESS LIKE 20 OR 19CC THE REASON FOR THIS IS I JUST GOT IT PORTED AND I DROPED DOWN TO 155PSI SO I'M RUNNING PUMP GAS AND DYNOED IN AT 82RWHP BUT WE HIT 85 BUT IT WAS WHEN WE LEANED IT OUT A LITTLE SO WE MADE IT RICHER AND GOT 82RWHP FOR THE FINAL. NOW I'M PUTTING THE BILLET INTAKES ON AND TRYING TO GET THESE DOMES SO I CAN RUN RACE-FUEL AND I WAS HOPING TO SEE AROUND 90 RWHP CAUSE I KNOW THE BILLET INTAKES ARE GOOD FOR 2RWHP CUASE I'VE SEEN MY BUILDER DO A LOT OF BIKES WITHOUT THEM WITH THEM AND IT'S ALWAYS THE SAME 2HP PLUS THE DOMES AND RACE GAS I SHOULD PICK UP 3-5 THEN WERE GONNA TRY ALKY AND NOS IN A MONTH OR 2 BUT ANY HELP WOULD BE GREAT THANKS GUYS.

[locogato11283]

first off i see 2 sentences here that should be about 10 sentences. also, lose the caps locks. try using some punctuation and itll be a little easier for people to help you...

[wesw]

noss machine

 

 

nossmachine.com

[RBD]

WHATS UP GUYS I WAS WONDERING IF ANYONE KNEW WHERE I COULD GET A SET OF DOMES MADE OR CUT I HAVE THE VITO'S MONOBLOCK SET-UP AND THEY ONLY HAVE 1 SET OF DOMES AND I WOULD LIKE TO GET DOMES THAT ARE 1 OR 2CC'S LESS LIKE 20 OR 19CC THE REASON FOR THIS IS I JUST GOT IT PORTED AND I DROPED DOWN TO 155PSI SO I'M RUNNING PUMP GAS AND DYNOED IN AT 82RWHP BUT WE HIT 85 BUT IT WAS WHEN WE LEANED IT OUT A LITTLE SO WE MADE IT RICHER AND GOT 82RWHP FOR THE FINAL. NOW I'M PUTTING THE BILLET INTAKES ON AND TRYING TO GET THESE DOMES SO I CAN RUN RACE-FUEL AND I WAS HOPING TO SEE AROUND 90 RWHP CAUSE I KNOW THE BILLET INTAKES ARE GOOD FOR 2RWHP CUASE I'VE SEEN MY BUILDER DO A LOT OF BIKES WITHOUT THEM WITH THEM AND IT'S ALWAYS THE SAME 2HP PLUS THE DOMES AND RACE GAS I SHOULD PICK UP 3-5 THEN WERE GONNA TRY ALKY AND NOS IN A MONTH OR 2 BUT ANY HELP WOULD BE GREAT THANKS GUYS.

374992[/snapback]

IF YOU HAVE A VITO'S HEAD AND WANT DIFFERENT DOME CC'S. WHY???????? DON'T YOU CONTACT VITO'S ABOUT THIS...???????????? DID YOU ALSO WANT TO KNOW WHAT TYPE OF TOILOT PAPER TO USE ON YOUR ASS? DIFFERENT TYPES WILL GIVE YOU BETTER ASS POWER THAN OTHERS, JUST LET US KNOW WHAT YOU EAT

[broke]

Nobody's cutting anyone any slack today. Survival of the fittest definately describes BansheeHQ lately. But I think that's what this site needs.

 

You builder should be able to tell you exactly what size dome you need and Vito's should be able to supply them. I know nothing of the Vito's block or head, but I will assume they take a special dome.

 

You should contact Vito's, see if they can get you some blanks, talk to the builder and see what he would like the dome to be and get someone that can machine the dome to exactly what you want. There is too much power to be made and lost in the dome itself to go with a standard cut. That's not to say that a standard cut isn't right 98% of the time, but you have obviously steped up to a monoblock, pay the little bit of extra and get a custom dome built for your exact motor.

[SANDSTAR]

IF YOU HAVE A VITO'S HEAD AND WANT DIFFERENT DOME CC'S. WHY???????? DON'T YOU CONTACT VITO'S ABOUT THIS...???????????? DID YOU ALSO WANT TO KNOW WHAT TYPE OF TOILOT PAPER TO USE ON YOUR ASS? DIFFERENT TYPES WILL GIVE YOU BETTER ASS POWER THAN OTHERS, JUST LET US KNOW WHAT YOU EAT

375024[/snapback]

 

I recommend Charmin with aloe. Gives me a couple more wipes before I get hamburger ass.

[05bansh]

I recommend Charmin with aloe. Gives me a couple more wipes before I get hamburger ass.

375129[/snapback]

Might as well just use some real aloe leaves straight out of the garden

[rebelbanshee2]

Might as well just use some real aloe leaves straight out of the garden

375143[/snapback]

 

noooo bad idea...aloe leaves are not soft, not leaves really either. loong and skinny with little barb like notches