? on 34mm carbs

[GSXR 1000]

Put 34mm carbs on the shee and was wondering why the trottle is so hard to

push?Will the springs loosen up or is there another fix cause I can not

ride all day my thumb gets way to sore.Was thinking maybe twist throttle

any opions or fixxes?

Thanks in advance

[bkabina]

I like the twist throttle and will not be switching back.But it is what you like that matters.You can cut some of the spring off so it isnt so long,probably the best way,but some people also grind some off the sides of the springs too.

[Machwon]

I usually cut the carb springs so that there is only one extra coil of spring when the slide is in the idle position and remove the spring from the thumb throttle. Works fine from there.

[locogato11283]

cut a few loops off the springs or go little by little until you can stand the throttle pull...works like a charm.

[FORMULASPEED]

You can get an extended billet thumb throttle from mod quad or

magic racing.

[islandsurfer]

remove the spring from the thumb throttle.  Works fine from there.

327000[/snapback]

 

 

Works great for me...That was all I did and rode for hours on Saturday..

[BdBanshee]

I just clipped a few coils off of the springs, big difference.

[RNBRAD]

You can get an extended billet thumb throttle from mod quad or

magic racing.

327115[/snapback]

 

I did this also, made a big difference. I new throttle cable can also make a huge difference if yours is old.