Jump to content

Recommended Posts

Posted

Hey Gents been battlin this problem for a while now. I did a total rebuild a while back with two new sleeves, wiseco pistons, new hot rods crank. My trouble is the damn thing just smokes more from the left side than the right. I have an ADA head and Trinity stage 4 33 mm carb set up with FMF fattys . I originally thought the thing was sucking tranny oil between the cases and I have split it 3 (count em ) 3 times looking for a potential leak . The o-rings on the head are in great shape and I just can't figure what the hell is going on.

The crosshaches on the cylinder walls are still there and I hold about 140 lbs of compression on both sides with 20 cc domes at sea level. I have switched around my jetting some and chaged premix oils in hopes of finding some type of change but nothing yet. What the the hell is going on here. I'm not losing coolant or oil, could it be the reeds? They are a little old but still look really healthy. Anybody else with the 2-1 carb setup had this problem? Thanks for any help Chad

Posted

i think its common for 2-1 carbs to smoke like that but im not sure. have you done a leak down test? do that and see what happens. what i dont understand with these carbs though is when you tip the bike to the left how gas gets in the right cylinder. maybe someone can explain that. sounds like it was fun though none the less. :jesterlaugh:

Posted

I don't have more smoke coming from one side then the other with my 2 into1 . Either your reeds are the problem or your leaking in air on one cylinder. Spray some starting fluid around your manifold/reed and see if the idle increases.

Posted

I was gonna say an air leak also. My 2-1 doesn't do that nor is it a common thing with the single carb. There is obviously something going on with that cylinder. Air leak or reed issue is a good first place to check.

Posted

i'd check with a airleak on that side to, i dont have probs with my 2-1 either, how much time do u have on that topend, did you break it all in yet?

Posted

I have gone through the break in procedure and now am on about my 4th tank of gas. I been running Bel ray HR 1 at about 40 to 1. I have looked for leaks . Done the carb and choke cleaner trick and found nothing. Maybe next week I'll replace the reeds and then just drive the piss out of it for a while. Thanks gents.

Posted

If you were sucking tranny oil the right cylinder would be smoking. I think your rings might not be seating that well. Do you have 140 comp in both cylinders? You might also check if the reeds are cracked or loose.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...