How to wire in trailtech rectifier

[06 banshee 2023]

Hi everyone. I have LED lights on my banshee but they don't work to full brightness on the banshee, only when i connect them a battery they work fully. I want to get them working but I don't want to do a full DC conversion. Is it possible to only use the trailtech recitifier to get direct current to the lights?

rectifier.webp

[375hp banshees]

@ClaudeMachining

@specialblend07

[ClaudeMachining]

Hi everyone. I have LED lights on my banshee but they don't work to full brightness on the banshee, only when i connect them a battery they work fully. I want to get them working but I don't want to do a full DC conversion. Is it possible to only use the trailtech recitifier to get direct current to the lights?
rectifier.webp

So, by now, you got the trailtech ac/dc converter/rectifier???

Envoyé de mon SM-S908W en utilisant Tapatalk

[specialblend07]

On 6/26/2024 at 8:10 AM, 06 banshee 2023 said:

Hi everyone. I have LED lights on my banshee but they don't work to full brightness on the banshee, only when i connect them a battery they work fully. I want to get them working but I don't want to do a full DC conversion. Is it possible to only use the trailtech recitifier to get direct current to the lights?

rectifier.webp 18.92 kB · 1 download

 

Yes, it is. Some might say you'll get a flicker at idle. I never experienced that. My LED bar worked with a rectifier for 8 years

[06 banshee 2023]

2 hours ago, ClaudeMachining said:

So, by now, you got the trailtech ac/dc converter/rectifier???

Envoyé de mon SM-S908W en utilisant Tapatalk
 

yes

[06 banshee 2023]

2 hours ago, specialblend07 said:

 

Yes, it is. Some might say you'll get a flicker at idle. I never experienced that. My LED bar worked with a rectifier for 8 years

Im fine with it flickering at idle, for me I have a different problem. My lights have two parts a high beam and a low beam, low beam works fine. When i turn on high beam, as i slowly rev the engine up the brightness increases, but when it reaches above a certain rpms, the high beam turns on. I think its around 3000-5000 RPM

[ClaudeMachining]

yes

You dont need the battery, just float the ground and plug the rectifier.

Envoyé de mon SM-S908W en utilisant Tapatalk

[kawa110]

Lots of write ups on this that include part numbers and pics, just need to be all combined in one place. And made easy for “simple” folk.


Sent from my iPhone using Tapatalk

[06 banshee 2023]

18 hours ago, kawa110 said:

Lots of write ups on this that include part numbers and pics, just need to be all combined in one place. And made easy for “simple” folk.


Sent from my iPhone using Tapatalk

have a link to any of them?

[375hp banshees]

I mean its pin'd at the top of tech info section

 

[06 banshee 2023]

On 6/27/2024 at 8:54 PM, ClaudeMachining said:

You dont need the battery, just float the ground and plug the rectifier.

Envoyé de mon SM-S908W en utilisant Tapatalk
 

If im correct, there’s four wires on the regulator, what do I do with the wires that usually go to a battery?