Old school banshee build

[DuneRat]

I've been debating on building a old school styled banshee. My father owned one and so did my uncle and i'm really getting a LOT of leads on parts and shit from them.

This is kind of the basis of what i can come up with, since i'm gonna dedicate my time to the dunes and sand in general but ideally cruising on the weekends. 

if you guys have any leads on old school parts let me know.

[specialblend07]

What's your budget/what're you expecting to spend?

[DuneRat]

To be honest I think I'm going all in so about 3 - 5k

[specialblend07]

18 minutes ago, DuneRat said:

To be honest I think I'm going all in so about 3 - 5k

That will build you an engine. Expect to be $7-10k for a full build.

It adds up, you think you budgeted correct, but never do.

[ride.race.live]

you need to list what you already have and what motor etc...

 

keep list simple...

VF4 reeds

FMF pipes

Stock carbs... etc... 

[DuneRat]

8 minutes ago, specialblend07 said:

That will build you an engine. Expect to be $7-10k for a full build.

It adds up, you think you budgeted correct, but never do.

I have the engine built how I like it

Lectron carbs

K&N clamp air filter

Toomey T5 exhaust 

I'd like to keep the engine simple but I can drop some cash on a billet cover 

[ride.race.live]

you need to specify what you really want then...

 

you want show bling... or performance?  or chassis upgrades etc... not really clear on what your shooting for when you say "old school" 

 

can get a nice 4mil built with shearers / chromed a nice billet head.    billet intake boots and lock up see through clutch, billet covers all around etc....  the list can be endless...

 

can go as far as + size stem chromed  +2arms  round house swinger.  braid brake lines .  drag cut harness, relocated CDI box to under seat.  seat skin. etc.... 

[DuneRat]

I'll probably keep it show blingy but still have it so I can shred it to the ground on the weekends 

[locogato11283]

Mattoon and Chariot both sell a lot of shit that is either polished or can be polished. Both are BansheeHQ sponsors also.

[DuneRat]

I might do some side pipes. Right now im thinking LED pipes are for me 

These fuckers are BIG but they're good for what i need

[specialblend07]

Just now, DuneRat said:

I might do some side pipes. Right now im thinking LED pipes are for me 

These fuckers are BIG but they're good for what i need

 

First, those will set you back like $1500

 

Second, those in the picture are for a DM. You have a stock cylinder? 

 

If you're duning this bike, then no.

[n2otoofast4u]

Just buy raw SCP and create the burn lines with a torch.

[ClaudeMachining]

Arlan, as long as you payhim 1700$ will make pipes for your engine size.

Kenny Roberts make some nice hand coned pipes too and for less $$$ iirc.

Envoyé de mon SM-G965W en utilisant Tapatalk

[specialblend07]

2 hours ago, ClaudeMachining said:

Arlan, as long as you payhim 1700$ will make pipes for your engine size.


Envoyé de mon SM-G965W en utilisant Tapatalk
 

IF I remember correctly... The LED pipes do not work as well on small bore motors. I thought it was shown that you're better off with a stamped pipe like SHEARER FTW

[SKEETER]

Who cares if they work. They're BIG