Repair Shop Splitting the Case Greater Austin TX area

[Bennett1042]

Looks to get the case spilt and case, due to air filter falling off, and sucking sand in through the carb.  Wondering if anyone knew of good repair shows in the Austin/Dallas area of Texas?

[sheerider11]

Do you have any mechanical ability at all?

Sent from my SAMSUNG-SM-G891A using Tapatalk

[Bennett1042]

Enough, to get by. Been watching a lot of youtube. 

[Keno]

Buy a Clymers, watch some videos, ask some questions, do it yourself.

Are you sure you need to tear it apart. Is it running poorly?

[sleeper06]

IMO there are very few places that would take the time cleaning and prepping the way you would do it. Especially if you’re not looking to ship to a sponsor 

[Bennett1042]

K & N filter fell off as Pismo Beach, got a lot of sand inside the motor. Took the top end apart today, visual signs of sand. Wondering if the crank is still good? 

[n2otoofast4u]

K & N filter fell off as Pismo Beach, got a lot of sand inside the motor. Took the top end apart today, visual signs of sand. Wondering if the crank is still good? 

Do it yourself. You Tube, Clymer, pictures, separate baggies...... You'll be amazed at how few parts their really is!

[ZillaFreak]

If you want to learn and grow your mechanical skills, the banshee is one of the easier quads to work on.

[Ayesully810]

its super easy. like said above just label everything in bags and keep organized. 

[ClaudeMachining]

20 hours ago, n2otoofast4u said:

21 hours ago, Bennett1042 said:

K & N filter fell off as Pismo Beach, got a lot of sand inside the motor. Took the top end apart today, visual signs of sand. Wondering if the crank is still good? 

Do it yourself. You Tube, Clymer, pictures, separate baggies...... You'll be amazed at how few parts their really is!

 

1 hour ago, Ayesully810 said:

its super easy. like said above just label everything in bags and keep organized. 

Those two guys are not particulary smart and are able to work on a banshee. So, you should be able to do it.

[n2otoofast4u]

26 minutes ago, ClaudeMachining said:

 

Those two guys are not particulary smart and are able to work on a banshee. So, you should be able to do it.

 

I see what you did here Claudia!

[Bennett1042]

I'll give it a try, doesn't look to complicated, hopefully I didn't ruin the crank.

[Ayesully810]

1 hour ago, ClaudeMachining said:

 

Those two guys are not particulary smart and are able to work on a banshee. So, you should be able to do it.

says the guy who didnt toqrue his primary drive nut on after dumping 10k in his banshee 

hehehe

but yeah apparently when i put my 7 mil together this year I put my fly wheel on and the key fell out and the fly wheel managed to stay in somewhat place, but up until last week there was no key 

Edited August 27, 2018 by Ayesully810