jmross Posted October 29, 2016 Report Posted October 29, 2016 Is it possible to replace the bump stop with out doing a full teardown of the shock? On the exploded view it looks like the bottom eye is threaded on to the shaft. This is for a factory rear shock . Thanks . Quote
Sandking Posted October 29, 2016 Report Posted October 29, 2016 No, if the bump stop is worn down good time to do new seals and fluid anyways. Quote
trickedcarbine Posted October 29, 2016 Report Posted October 29, 2016 If the shock is worn enough to make a new bump stop necassary, it's time for a rebuild anyway. Quote
registered user Posted November 12, 2016 Report Posted November 12, 2016 I bet you could slice it with exacto knife and super glue it back together. remember you heard it here first Quote
m671054 Posted November 12, 2016 Report Posted November 12, 2016 Wouldnt the glued section not compress and cause it to split open? I get ones for a 250r off ebay as they are closest to oe dimensions. Full rebuild should be expexted. Quote
bigweav81 Posted November 12, 2016 Report Posted November 12, 2016 TSS Sent from my SM-S820L using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.