Yamaha_Banshee_Living Posted October 7, 2016 Report Posted October 7, 2016 I have 1400 to spend on mods and parts. For my banshee its stock bore with toomey t5s and dual k&n air filters What would you recomend ? Quote
guns4children Posted October 7, 2016 Report Posted October 7, 2016 Save up and drop 4000 to make it decent 2 Quote
Big Mike NY Posted October 7, 2016 Report Posted October 7, 2016 Address all your suspension first! Shocks, a-arms, Swingarm and axle and tires! 1 Quote
guns4children Posted October 7, 2016 Report Posted October 7, 2016 You could put that towards a motor of you wanted to hop it up. By the time the builder is done you'll have saved enough for suspension. Sent from my BIG BLACK COCK using Tapatalk. Quote
special06shee Posted October 7, 2016 Report Posted October 7, 2016 Everone always say suspension first, but i say f that. Get your top end ported and a fresh set of pistons, timing plate, good clutch and hang on. Your t5 will work well with a decent port job. 3 Quote
RagunCajun Posted October 7, 2016 Report Posted October 7, 2016 Elks stage 3s and some good a-arms. Suspension > horsepowers. However you need to have funds set a side for top ends, bottom end and other repairs/maintenance that comes up before mods. 2 Quote
special06shee Posted October 7, 2016 Report Posted October 7, 2016 There you guys go with suspension shit. Give it up. Very few, if ANY on this site are capable of outriding stock suspension components.. Quote
guns4children Posted October 7, 2016 Report Posted October 7, 2016 100% honest statement here.... Fuck suspension for trail riding. May banshee has triple rate works shocks that are old as dirt and probably need rebuilt. I rode a raptor 700 with long travel arms and elkas and although they were a little better are they worth all that money? Not to me. Quote
guns4children Posted October 7, 2016 Report Posted October 7, 2016 Lol PA must be really flat and smooth for two guys to say suspension isnt a big deal. Quote
special06shee Posted October 7, 2016 Report Posted October 7, 2016 Ill take a good running mtr any day over an under powered turd with suspension. 1 Quote
guns4children Posted October 7, 2016 Report Posted October 7, 2016 ^says the guy with a 10 cub! Quote
guns4children Posted October 7, 2016 Report Posted October 7, 2016 I remember everything! You were faster with the r2s also I bet you miss them. I will say one of my favorite topends I ever had was a stock port with "super stock" pistons. Sent from my BIG BLACK COCK using Tapatalk. Quote
Yamaha_Banshee_Living Posted October 7, 2016 Author Report Posted October 7, 2016 Thank you all im going tk be adding druff in the shopping cart and see what i wnd up with Quote
Big Mike NY Posted October 7, 2016 Report Posted October 7, 2016 A "built" suspension will definitely give you the edge over a bike with the same exact engine mods but with a stock suspension. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.