Thack82 Posted February 14, 2017 Report Posted February 14, 2017 Ur bathroom scale is as legit as ur posts I've come to a conclusion, JT is either a high functioning retard or a low functioning 10 year old kid! Either way he doesn't need to be on anything that has a motor especially a Banshee. I would love to see some the work that JT Machining has done, obviously he doesn't use anything thats CNC controlled he can't read or write! Quote
Thack82 Posted February 14, 2017 Report Posted February 14, 2017 (edited) Who is T Hack? Are you talking to me? Edited February 14, 2017 by Thack82 Quote
JTmachining Posted February 14, 2017 Report Posted February 14, 2017 Who is T Hack? Are you talking to me? LOL Quote
Thack82 Posted February 14, 2017 Report Posted February 14, 2017 Ur bathroom scale is as legit as ur posts What would you recommend? That set of scales is accurate within a half pound which is by far more accurate than whatever you used to get the 46lb figure you pulled out of your ass! Lol Quote
Thack82 Posted February 14, 2017 Report Posted February 14, 2017 Nobody can post up the link that I ask for? Quote
LaegerEliminator Posted February 14, 2017 Report Posted February 14, 2017 I've come to a conclusion, JT is either a high functioning retard or a low functioning 10 year old kid! Either way he doesn't need to be on anything that has a motor especially a Banshee. I would love to see some the work that JT Machining has done, obviously he doesn't use anything thats CNC controlled he can't read or write!JT has put his work on display on numerous occasions here on the BHQ. I'd suggest you dig a little and discover his machining skills. 1 Quote
Sandking Posted February 15, 2017 Report Posted February 15, 2017 Post some pictures of the new frame if you could. 1 Quote
Sandking Posted February 23, 2017 Report Posted February 23, 2017 Was this frame imaginary or did it happen, post some pictures and before put together would be best.. Quote
bigweav81 Posted April 18, 2017 Report Posted April 18, 2017 Hold on I'll message Tom. Sent from my SM-S820L using Tapatalk Quote
guns4children Posted April 19, 2017 Report Posted April 19, 2017 I just talked to him yesterday. Says the welders running fine. He will have his pipes out in a jiffy. 1 Quote
bigweav81 Posted April 19, 2017 Report Posted April 19, 2017 Well there ya go. Sent from my SM-S820L using Tapatalk Quote
timmyZR1 Posted April 23, 2017 Report Posted April 23, 2017 wow! shit tons of bullshit... nothing about doing the actual swap. im serioulsy looking for that swap, what kind of heavy mods need to be done to the frame,subframe?? Quote
trickedcarbine Posted April 23, 2017 Report Posted April 23, 2017 wow! shit tons of bullshit... nothing about doing the actual swap. im serioulsy looking for that swap, what kind of heavy mods need to be done to the frame,subframe??There is a dude on Facebook selling conversion kits for the motor mounts and what not. 1 Quote
sheerider11 Posted April 23, 2017 Report Posted April 23, 2017 wow! shit tons of bullshit... nothing about doing the actual swap. im serioulsy looking for that swap, what kind of heavy mods need to be done to the frame,subframe??it's going to be hard to do in an R frame. The steel/aluminum is going to require a lot of skill But take it and look. It's not all going g to be laid out in front you. These swaps are always a guessing game. 1 Quote
trickedcarbine Posted April 23, 2017 Report Posted April 23, 2017 For yfz, not yfzrWell, not much info on that unicorn swap. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.