12-o-clock-wheelie Posted June 12, 2015 Report Posted June 12, 2015 Just finished rebuilding top n bottom end new crank new pistons whole 9 fuckin yard boys....welll started er up today and the mother fucker won't idie on its own....it'll run on one side like perfect but the other side barely runs but that's only when your back n forth between half choke and no choke....otherwise it'll run fine for a second then die Quote
troyzstang Posted June 12, 2015 Report Posted June 12, 2015 Did you do a leakdown test before starting it? Quote
12-o-clock-wheelie Posted June 13, 2015 Author Report Posted June 13, 2015 Stock head...I don't have a air leak tester nor do I know how to do it?? It didn't spark bcuz the carb slide was in wrong now the piece of shit won't idle...it's a never ending list once this fucker runs it's sold have had nothing but problems ever since the cock sucker blew up the first time...idek why. Only machine that gives me problems is this piece of fuck Quote
xTHUNDERCATx Posted June 13, 2015 Report Posted June 13, 2015 Blame the machine for your fuck ups...... Sounds about right. 3 Quote
sheerider11 Posted June 13, 2015 Report Posted June 13, 2015 Stock head...I don't have a air leak tester nor do I know how to do it?? It didn't spark bcuz the carb slide was in wrong now the piece of shit won't idle...it's a never ending list once this fucker runs it's sold have had nothing but problems ever since the cock sucker blew up the first time...idek why. Only machine that gives me problems is this piece of fuck sounds more like you don't know what youre doing then the quad being a piece of shit. Its a machine, it can be fixed. 2 Quote
Larry's Shee Posted June 13, 2015 Report Posted June 13, 2015 http://lmgtfy.com/?q=leakdown+test+%2B+Banshee+HQ http://lmgtfy.com/?q=How+to+build+a+leaktester+%2B+Banshee+HQ Where you at? I'll give you $600 for your "piece of FUCK"as it sits now, Quote
Larry's Shee Posted June 13, 2015 Report Posted June 13, 2015 http://lmgtfy.com/?q=piece+of+fuck+%2B+Banshee+HQ Quote
sleeper06 Posted June 13, 2015 Report Posted June 13, 2015 If you don't leak test it it will blow again Quote
SHEEMAN0415 Posted June 14, 2015 Report Posted June 14, 2015 You rebuilt the whole motor, put it all back together and didnt leak test it? What are the chances you put all those pieces back together and have zero leakage? Quote
12-o-clock-wheelie Posted June 14, 2015 Author Report Posted June 14, 2015 Wisconsin, 600 and the fuckers ypurs...lol just kidding. Buddy a mine has a guage or whatever to do a leak down test. Gunna give er a go. Yanked carb cleaned er all up real nice. Carbs are synced. Ran out a gas gunna have to head on over to mobil pick some up tho Quote
bigweav81 Posted June 14, 2015 Report Posted June 14, 2015 There's a difference between a leak down, and compression test. sent from yo mammy house Quote
12-o-clock-wheelie Posted June 14, 2015 Author Report Posted June 14, 2015 Yes I am well aware as to what a compression test is. And trust me. This quad has seen it's better days....now days you fuckin yank a carb clean er up or what have you...I shit you not you'll have 8 more problems pop up after u fix the last thing...gets real old real fast 1 Quote
12-o-clock-wheelie Posted June 14, 2015 Author Report Posted June 14, 2015 Like today I yanked the carb to see if the pilot was clogged or something. ..never touched the right side carb now she overflows constantly...little shit like that now i gotta yank the other carb n clean the float needle thingy...shit never ends n never runs Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.