Bipolarbanshee Posted September 10, 2014 Report Posted September 10, 2014 So my 4mil long rod crank had slide to the clutch side thanks to brad tyson for not putting the clips in that hold it in place not on the primary side of the crank the weld has wore off from running it while it was slammed against the case it has very little play in the pin and web but I was wondering could It be re-welded I know there has to be some way to fix this issue I just don't want to have to buy a new crank when this one only has 10 passes on it Sent from my iPhone using Tapatalk Quote
trickedcarbine Posted September 10, 2014 Report Posted September 10, 2014 (edited) FIRST! (Gonna be a shit show) Your crank is probably way twisted out of phase as well. So if it can be tweaked and re welded, I guess it would run. If it were me, I'd just get a new one. Edited September 10, 2014 by trickedcarbine Quote
Bipolarbanshee Posted September 10, 2014 Author Report Posted September 10, 2014 First? Sent from my iPhone using Tapatalk Quote
Bipolarbanshee Posted September 10, 2014 Author Report Posted September 10, 2014 Fixable? I didn't know what I was doing at first so I sent him my whole motor for port work and a few bearings being replaced and a override tranny with a brand new crank to be put in Sent from my iPhone using Tapatalk 1 Quote
n2otoofast4u Posted September 10, 2014 Report Posted September 10, 2014 Gonna need pics. MOST of the time this is fixable but without seeing it and the tolerance it's hard to say Quote
Bipolarbanshee Posted September 10, 2014 Author Report Posted September 10, 2014 Money I don't have ATM, I have bills and cars to keep on the road I spent 10,000 in this banshee in less than a year I don't want to spend anymore thanks to that pig brad tyson for not putting simple fucking clips in Sent from my iPhone using Tapatalk Quote
Bipolarbanshee Posted September 10, 2014 Author Report Posted September 10, 2014 I'll take pics in the am it's not too bad tho but if it's fixable I'd love to know Sent from my iPhone using Tapatalk Quote
n2otoofast4u Posted September 10, 2014 Report Posted September 10, 2014 10k????? And all you got was a 4mil??? Quote
Bipolarbanshee Posted September 10, 2014 Author Report Posted September 10, 2014 Chrome aloy frame extended and abunch of other shit super cub setup on 4 mil lectron carbs lockup many more goodys Sent from my iPhone using Tapatalk Quote
sheerider1026 Posted September 10, 2014 Report Posted September 10, 2014 $10k. So what's another 400 bones gonna hurt? Quote
Phelps Posted September 10, 2014 Report Posted September 10, 2014 if you truly handed him the motor and had him do the work, the smart thing would have been to take pic's as you tore it down to show there was no retainer. box it up send it back to him and had him make it right. yes there is no warranty against parts failure, but every good builder will warranty against workmanship. hopefully you contacted him before making this thread... Quote
Bipolarbanshee Posted September 10, 2014 Author Report Posted September 10, 2014 Not tax season yet haha, tax money and fixing cars got me this far, but currently ATM I just can't chunk out 400$ for Tyson's fuck up Sent from my iPhone using Tapatalk Quote
Bipolarbanshee Posted September 10, 2014 Author Report Posted September 10, 2014 I contacted him he told me to buy a new crank and was stuck on about how he put the clips in, but my crank would have never moved if the clips were placed in. He won't answer my calls or text now. I called him from a different number and he said he was busy after hearing my voice and hung up. Sent from my iPhone using Tapatalk 1 Quote
n2otoofast4u Posted September 10, 2014 Report Posted September 10, 2014 Wait..... You are 100% they weren't there? You sure the weld didn't break and the one side walked off? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.