stealthboy Posted June 2, 2014 Report Posted June 2, 2014 Went to Hatfield and McCoy's over the weekend and blew up my shee...i live in N.E. ohio...does anyone know of a good engine builder near me? I am thinking of going 4 mil build but not sure...i really need to talk to someone and get a price....thanks in advance...Dave Quote
lil Doobie420 Posted June 2, 2014 Report Posted June 2, 2014 Surfjag. Can do it pm him. We are in va. Quote
mysterion Posted June 2, 2014 Report Posted June 2, 2014 I am not too familiar with any builders in NE OH. Not to say there aren't. Might be better off sending out Quote
Banman1122 Posted June 2, 2014 Report Posted June 2, 2014 Rdz is good. Builds strong motors. I just had him do the 4mil porting using blaster pistons and big bore 18cc domes. He's not a site sponsor but this build came in at 600 for porting 500 for crank and 250 for pistons and gaskets. I also went with pwk39mm carbs and a timing plate. Sent from my iPhone using Tapatalk Quote
sprinklerman Posted June 2, 2014 Report Posted June 2, 2014 Rdz is good. Builds strong motors. I just had him do the 4mil porting using blaster pistons and big bore 18cc domes. He's not a site sponsor but this build came in at 600 for porting 500 for crank and 250 for pistons and gaskets. I also went with pwk39mm carbs and a timing plate. Sent from my iPhone using Tapatalk 600.00 port FTW! Sent from a van down by the river Quote
locogato11283 Posted June 2, 2014 Report Posted June 2, 2014 I would run far away from RDZ! Call some of the BansheeHQ sponsors and pick whoever you like best! http://www.bansheehq.com/bansheehq-sponsors/ Quote
Banman1122 Posted June 3, 2014 Report Posted June 3, 2014 Hot rods crank with yamaha tz end bearings costs 500 bucks bud (don't buy a china made crank). Piston kit is 100 per piston with bearing. Porting included big bore sleeving triple exhaust ports and boost ports and 4mil porting 600 bucks. Pwk39mm carbs 400. Rdz always answers the phone (even at 10pm at night) and has come out on race day to help test and tune. Customer service beats cheaper prices. Sent from my iPhone using Tapatalk Quote
Banman1122 Posted June 3, 2014 Report Posted June 3, 2014 Did I need to have my attorney present when I buy this overpriced shit or not?It's not overpriced. You can get the cheaper stuff but it's less quality especially the crank. You must be a cheapskate and want stuff for free. Sent from my iPhone using Tapatalk Quote
sprinklerman Posted June 3, 2014 Report Posted June 3, 2014 Paid endorsement? Sent from a van down by the river Quote
chevota84 Posted June 3, 2014 Report Posted June 3, 2014 Hot rods crank with yamaha tz end bearings costs 500 bucks bud (don't buy a china made crank). Piston kit is 100 per piston with bearing. Porting included big bore sleeving triple exhaust ports and boost ports and 4mil porting 600 bucks. Pwk39mm carbs 400. Rdz always answers the phone (even at 10pm at night) and has come out on race day to help test and tune. Customer service beats cheaper prices. You bought a China crank. Sent from my iPhone using Tapatalk Sent from my SCH-I545 using Tapatalk Quote
stealthboy Posted June 3, 2014 Author Report Posted June 3, 2014 Ok....I think that I am going to try and do the build myself....I want a good reliable and strong 4mil build...can anyone direct me in the best parts for this...and a recommendation on the jug work? What is the best crank that's rebuild able?which Coolhead with what cc domes should I go with ? What would be the best reeds? I use my shee for trail riding. What I am really wanting is good power with reliability...am I going the right route? Quote
Larry's Shee Posted June 4, 2014 Report Posted June 4, 2014 Cranks aren't worth rebuilding unless it's real expensive to start with. Quote
stealthboy Posted June 4, 2014 Author Report Posted June 4, 2014 So what crank would you recommend? Sent from my SCH-I605 using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.