camatv Posted October 8, 2014 Report Posted October 8, 2014 ok update on the slp's they are bad ass. we ran them on a t rex 400 and they make TQ they dont rev much at all. but the bike would just power wheelie across a dune. that is shift into 3rd low in the rpm and just punch the throttle, no clutching and it would just go buuuuurrrrrrrAAAAPPP and yank the front off the face of the dune. on a +4. it hardley used any fuel because it didnt need to rev to get around.. NICE they have a very distinct sound. very very quiet but get on it and it has a nice bark to them.. 2 Quote
bluebanshee98 Posted October 8, 2014 Report Posted October 8, 2014 4 mil serval on 110 with slp pipes = tractor Quote
bluebanshee98 Posted October 8, 2014 Report Posted October 8, 2014 ^^^went for a lil rip!Hahahahha Quote
MessyJesse69 Posted October 21, 2014 Report Posted October 21, 2014 I have a full dynoport system 2 into 1 header into dynoports exhaust and I couldn't ask for a better trail quad. Rides like a 450 in the woods. I creep up most hills in 3rd gear and putt in 6th everywhere Quote
MessyJesse69 Posted October 21, 2014 Report Posted October 21, 2014 I have a full dynoport system 2 into 1 header into dynoports exhaust and I couldn't ask for a better trail quad. Rides like a 450 in the woods. I creep up most hills in 3rd gear and putt in 6th everywhere Quote
HomesteadBanshee Posted January 31, 2015 Report Posted January 31, 2015 Dmc 916 more down low than t5's and more top then t5's.also the 2 into 1 exhaust system are ok some people like them some dont, and with the slp i dont know i just heared they come on low and have a tourqe. Quote
trickedcarbine Posted February 2, 2015 Report Posted February 2, 2015 The few sheets I've found from SLP's are stellar! Used to be, if you had an 80hp 4mil, it needed Searers or CPI's to do it and it did it kinda late. Not the case for the SLP's. They make the same peak hp but in an RPM range like Pro Circuit's. Quote
trickedcarbine Posted February 2, 2015 Report Posted February 2, 2015 Gitchya sum deeee mmmm ceeee's ..VROOOOOM! So, I gotta Know. What ever happened to the Cheetah and Rockets? Did it just never run like it should have? Quote
GNR101 Posted February 7, 2015 Report Posted February 7, 2015 (edited) i have a 10mm serval with CPI's and pwk33s for trails... power everywhere Edited February 7, 2015 by GNR101 Quote
camatv Posted February 7, 2015 Report Posted February 7, 2015 and to think the slp has been out for a very long time.. hell i think they even put them on clearance for a while at 300 shipped... Quote
dave5.0 Posted February 7, 2015 Report Posted February 7, 2015 So what you think they do next to a pro circuit Cam? Those sound like the pipes I need on my 4 mill stock cylinder duner with 28s. Has pcs now. Quote
87sheerips Posted February 11, 2015 Report Posted February 11, 2015 BUY SLP's HERE! http://www.jdscustoms.com/product-category/slp-atv-parts-new/slp-yamaha-banshee-products/ Quote
trickedcarbine Posted February 11, 2015 Report Posted February 11, 2015 So what you think they do next to a pro circuit Cam? Those sound like the pipes I need on my 4 mill stock cylinder duner with 28s. Has pcs now.They would certainly come on just as early and peak early as well, but still make the higher out put of a "inframe drag pipe". Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.