Rear tires that will handle 80 mph

[Deadbeat]

well there ya go, what sort of motor you running

[Sheeba711]

443 cub

[Deadbeat]

7mm nice one

[camatv]

are the wheels lined up on the hubs?  banshee hubs have lil nubby's on them that line the wheels up  so many times i see people halfass slap the wheel on  its hanging half off the hub  they just thread the nuts on 2 threads  then slam them on with an impact.  bashing the wheel into those centering nubby's..

 

if thats ok  you need to balance the combo. 

[Drturbodiesel]

Put new tires bk on stock wheels. Problem got way better but still noticeable. It's bout got to be all tires now. Next time it's warm enough to ride I'm Gona jack it up and try to cut off the high spots.

[10milmike]

You need to get balanced. Mine runs 102 mph and u can feel the difference when they are not.

 

Sent from my Samsung Galaxy note 3

[Drturbodiesel]

Yea there good and lined up. Is it a specialty balance machine or will one for a automobile work? I have acess to a plain one at the dealership.

[sstaton1983]

hahaha I do believe you have issues other than tires. I am curious what kind of banshee build you have that is doing 80mph in 5th gear?????

The post said my banshee does 80 in 5th gear but shakes violently in 6th..................NOT

[sstaton1983]

"Yea there good and lined up. Is it a specialty balance machine or will one for a automobile work? I have acess to a plain one at the dealership. "

 

 

The one at my dealership will not.

Edited February 6, 2014 by sstaton1983

[10milmike]

It should. I had American Tire balance mine. In 5th at 102 u can fell the difference for sure.

 

Sent from my Samsung Galaxy note 3

[BANSHEE HP]

Some tire shops can't do a 10" rim. Ask around tho there are plenty that can.

[trickedcarbine]

Check the actual splines on the axle.

Get fresh hubs

Ditch huge heavy ITP SS wheels

Check pivot bearings and sleeve

Get quality tires and wheels.

Maybe balance them.