camatv Posted February 7, 2014 Report Share Posted February 7, 2014 bring a big towel cause there is no curtain.. back before i had the shitty ass rv thats all i used. no big deal. if you cannot handle that stay home i mean really.. i'll be there of course. down on the nice concrete spots with nice power and a drain behind them for the rain. down in the tree's for wind block. not like it takes more than 2 minutes to drive up top to the mayhem. dueces wild is all the way across the dunes about a mile from the north gate, down a horrible road, mostly in town. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted February 21, 2014 Author Report Share Posted February 21, 2014 Identical. Only there's sand instead of mud. Quote Link to comment Share on other sites More sharing options...
oldskool Posted February 27, 2014 Report Share Posted February 27, 2014 Surely they work way better than knobby? We run the hell out of them Dave. Did you get wheels also? Quote Link to comment Share on other sites More sharing options...
trx510r Posted February 27, 2014 Report Share Posted February 27, 2014 Sandstars will do fine best molded paddle on the market imo Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted February 27, 2014 Author Report Share Posted February 27, 2014 Surely they work way better than knobby? We run the hell out of them Dave. Did you get wheels also? They work well. I run them on my YFZ.. Too many tractions... Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted February 27, 2014 Report Share Posted February 27, 2014 Mike, no wheels just tires. Ive got stock yfz wheels for the front tires and some G force XC wheels for the rears.Man. Wish I had known you needed some paddles. I have some sand skate 2's you could have borrowed. Sent from a van down by the river Quote Link to comment Share on other sites More sharing options...
oldskool Posted March 1, 2014 Report Share Posted March 1, 2014 Man. Wish I had known you needed some paddles. I have some sand skate 2's you could have borrowed. Sent from a van down by the river Got anything that will fit 250r(rear) Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted March 1, 2014 Report Share Posted March 1, 2014 Sure don't man. I guess you could re drill the bolt pattern on these if you want. Sent from a van down by the river Quote Link to comment Share on other sites More sharing options...
RobertR Posted March 1, 2014 Report Share Posted March 1, 2014 Got anything that will fit 250r(rear) I think we have 2 sets. Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted March 1, 2014 Report Share Posted March 1, 2014 Got anything that will fit 250r(rear) Banshee hubs fit on a honda. Just mount yamaha hubs. Quote Link to comment Share on other sites More sharing options...
oldskool Posted March 1, 2014 Report Share Posted March 1, 2014 Banshee hubs fit on a honda. Just mount yamaha hubs. Tried that John, no way in hell my yamaha hubs will go on honda axle. I think we have 2 sets. I bought some used paddles for the banshee and have some rims drilled for both bikes, Gets old swapping back and forth and don't want to buy more tires just for this ride. Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted March 1, 2014 Report Share Posted March 1, 2014 Tried that John, no way in hell my yamaha hubs will go on honda axle. That's odd.......I had a 400ex and we ran yamaha hubs since all the tires we had were yamaha pattern. And GOMEZNITRO or NITROGOMEZ had a buddy on last years Badlands HQ ride that had a honda axle on his banshee and needed Yamaha hubs to run some tires he borrowed. I brought him spare Yamaha hubs and they worked great. My 400ex had an aftermart axle and needed a few washers to get the hub tight....but a few washers from Ace Hardware did the trick. I don't know what else to tell you. Sorry....I was 100% sure it would work. Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted March 1, 2014 Report Share Posted March 1, 2014 I have some Honda hubs that fit a banshee axle splines. Not sure what they were off of but like john said I used to leave them bolted to the rims and just take the big axle nut off to use the hub & wheels Quote Link to comment Share on other sites More sharing options...
RobertR Posted March 1, 2014 Report Share Posted March 1, 2014 We have 2 sets of Honda rims and paddles. Quote Link to comment Share on other sites More sharing options...
oldskool Posted March 3, 2014 Report Share Posted March 3, 2014 Sounds great RobertR Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.