The top of my exhaust port is 27.5 mm from the top of the jug, what level porting is it?

[rg97]

When I bought my banshee someone (not a pro, almost a botched job) had gone and knife-edged my intake, and made my exhaust a lot bigger. as it sits now, the exhaust port top is 27.5 mm from the top of the jug. Just wondering if this is considered a trail, dune, or  drag port (in general). I would provide pics, but i already have the engine back together and running

[BANSHEE HP]

192*

[rg97]

is it considered a trail, dune, drag, etc?

[Surfrjag]

Trail port

[375hp banshees]

I thought 192* was alot more aggressive than a trail (or does it depend on the transfers that go along w/ it?)

[Coupelx]

Depends on where the transfers are at which is probably stock which means its probably not alot of fun to ride unless its wfo in the open.

 

192 would be considered a "dune" port by the general public.

[trickedcarbine]

My motor is about 192* on the exhaust. It is what I suppose many would call a dune port but my particular motor has additional ports cut in to the liner as well. This helps keep some low end along with compression and timing it comes on super hard almost around 6-6,500k