Base gasket? Thinnest.

[facetiousxm]

I see everyone selling a .012 base gasket but can swear I seen a .007mm before anyone know where they sell it??

[J-Madd]

Some don't even run a base gasket.

[facetiousxm]

Okay thanks! Appreciate it.

[Pastrykiller]

1211 sealant. Thin layer and let it sit for 24 hours. Check your squish afterwards. Smallest base gasket u will find.

[RadarRacing]

You can get .008 also and a few other thicknesses. Some .010 gaskets will smash down to .007 or .008. I dont know what gasket you are using right now or how much less squish clearance you need.

[possum]

grey permatex

[locogato11283]

Gorilla glue.

[Pastrykiller]

Gorilla glue.

I'm sure someone has tried this already.

[J-Madd]

He actually said 0.007 mm which almost isn't even measurable. 0.0027" or something like that. I'm sure he meant thousandths though.

[RadarRacing]

Im sure meant 7 thous.

[facetiousxm]

Thanks ill try the 1211 sealant, I have a .012 now had .005 taken of my domes from some rash believe I had a .020 base gasket originally. Just trying to keep compression around 190lbs.

 

Thanks

[J-Madd]

The 0.05" was taken out of the chamber, or off the step? Or both? What was the squish before? If the 0.05" was taken off of the step, you're going the wrong way on the base gasket.

[trickedcarbine]

^ this

[facetiousxm]

Thanks once my cub comes back from millennium ill check the squish.