blackedout96 Posted November 24, 2011 Report Posted November 24, 2011 Just a few things left from my Banshee ... -4mill Stock Cylinders with Drag Port from Havoc Performance. Not going into a long explanation on these, if you know havoc, you know how fast these are. $450 shipped FIRM -Front Hubs with new Bearings, Seals and Freash JDScustoms PC. Rotors and spindles included. $80 shipped -Polished Dog Bone with swinger link and all bushings/dust caps. Not perfect, but nice and looks great on the bike. $40 shipped -Coolant bottle bracket.. bolts to rear air box tabs, comes with stainless bolts. $30 shipped SOLD -2 good kicker gear assemblies. $20/ea shipped -clutch rods and balls (make offer) -stock stator cover with rubber seal and stainless hardware $35 shipped -Pro Design tether kill switch. $25 shipped -Clutch cable $16 shipped -Throttle cable(used with 34pj's) $20 shipped SOLD -Motion pro quick disconnects(the $20/ea. ones)4 females for hoses from pingle and purge bottle, 2 males for carb hoses Make Offer -Complete TORS assembly lol Make Offer -Front Brake lever and res with billet cap. One stripped head on a bolt the attaches the cap $25 shipped -Chrome Lug Nuts, some wear from impact sockets(you'll find a little rust on them) $15.50 shipped -Rear brake master, wire wheeled clean $30 shipped -Coolant bottle. $15 shipped Prices DO NOT include paypal fee, you must send as a gift and cover the fee or contact me for a total including the fee. Shipped prices are to the lower 48 only... I will ship international but you'll need to contact me for a shipping cost. PICS can be seen in my previous part out listing, if what your looking at is not pictured, please let me know and I'll get a pic to you asap. http://bansheehq.com/forums/index.php?showtopic=148212&st=0 Thanks everyone! Parts are as described and I ship quick! PM me through here or you can call/text me at (574)292-8906 Quote
joee20002 Posted November 24, 2011 Report Posted November 24, 2011 I they sold on Ebay????? -4mill Stock Cylinders with Drag Port from Havoc Performance. Not going into a long explanation on these, if you know havoc, you know how fast these are. $515 shipped FIRM Quote
blackedout96 Posted November 24, 2011 Author Report Posted November 24, 2011 I they sold on Ebay????? -4mill Stock Cylinders with Drag Port from Havoc Performance. Not going into a long explanation on these, if you know havoc, you know how fast these are. $515 shipped FIRM Nope, reserve wasn't met Quote
BLOODRAGE Posted November 24, 2011 Report Posted November 24, 2011 would those cylinders work on a stock stroke banshee? Quote
blackedout96 Posted November 24, 2011 Author Report Posted November 24, 2011 would those cylinders work on a stock stroke banshee? No sir, need a 4mill crank. Quote
BLOODRAGE Posted November 25, 2011 Report Posted November 25, 2011 with a 4mil crank you dont have to trench the case? i might be interested in these Quote
alcoholbanshee Posted November 25, 2011 Report Posted November 25, 2011 You do not need to trench for a 4 mil............these are proven fast cylinders, cant go wrong........... Quote
J.J. Posted November 25, 2011 Report Posted November 25, 2011 Pm'd on the coolant bottle bracket. Quote
blackedout96 Posted November 25, 2011 Author Report Posted November 25, 2011 Pm'd on the coolant bottle bracket. Didn't get a pm bud Quote
Tf705 Posted November 25, 2011 Report Posted November 25, 2011 do the cylinders come with pistons? what bore are they on? what kind of power did your set up make? Quote
87sheerips Posted November 26, 2011 Report Posted November 26, 2011 This is crazy you still have the cylinders Mike.... Everyone these cylinders are CUB wreckers... Cant go wrong Quote
blackedout96 Posted November 27, 2011 Author Report Posted November 27, 2011 This is crazy you still have the cylinders Mike.... Everyone these cylinders are CUB wreckers... Cant go wrong No kidding man, thought these would be the first to go. May just give me an excuse to build a drag bike in the spring if they're still around Quote
Infamous039 Posted November 28, 2011 Report Posted November 28, 2011 I think these are still for sale b/c No one wants to buy cylinders for $500 that are already bore .080 over, just my take on it but I could be wrong. Quote
shanYE west Posted November 28, 2011 Report Posted November 28, 2011 People might not realize.. but you can always have them plated instead of bored. Plating can be applied up to .5mm thick.. this would mean you can take a 66mm cylinder (.080 over) and plate them down to a 65.5mm (.060 over) and if something happens again.. then can be replated... the cylinder are not junk by any means... Quote
blackedout96 Posted November 28, 2011 Author Report Posted November 28, 2011 People might not realize.. but you can always have them plated instead of bored. Plating can be applied up to .5mm thick.. this would mean you can take a 66mm cylinder (.080 over) and plate them down to a 65.5mm (.060 over) and if something happens again.. then can be replated... the cylinder are not junk by any means... Thanks for clearing that up for me shayne. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.