chayote86 Posted October 3, 2011 Report Posted October 3, 2011 I just blew the top end on my banshee and have been thinking about slapping a big bore in there any suggestions? Quote
n2otoofast4u Posted October 3, 2011 Report Posted October 3, 2011 big bore kit? For your stock cylds? Quote
chayote86 Posted October 3, 2011 Author Report Posted October 3, 2011 Can u get bigger sleves installed in a stock head? Should i go with an aftermarket head like cubs or somthing? Whats up with 68mm and stuff is that the stroke on the crank or what? I wanna go bigger, stronger, faster! u dig? Quote
chayote86 Posted October 3, 2011 Author Report Posted October 3, 2011 X2 I see now! Would i need to buy a longer crank with the serval cylinders? Quote
chayote86 Posted October 3, 2011 Author Report Posted October 3, 2011 Has anyone heard anything on the athena 392 kit? Quote
RZBansheeMan Posted October 3, 2011 Report Posted October 3, 2011 You can get serval cub cylinders for stock stroke and 68mm bore, that is 4mm bigger bore and should = close to 392cc... you dig ??? Quote
chayote86 Posted October 3, 2011 Author Report Posted October 3, 2011 Ya i dig.. I searched on the athena jugs and read lots of bashing on them thanks tho seems like i should do some good research before spending $$ Quote
Fastassbanshee96 Posted October 3, 2011 Report Posted October 3, 2011 Go with the several. It's what I have and you won't be disappointed. What were you going? Stock port? Quote
chayote86 Posted October 3, 2011 Author Report Posted October 3, 2011 Naw il prob get whatever I get ported. I have my stock heads ported now Quote
spurdy Posted October 3, 2011 Report Posted October 3, 2011 Ya i dig.. I searched on the athena jugs and read lots of bashing on them thanks tho seems like i should do some good research before spending $$ Good idea. Building a motor that makes good power where you want it is the only way to do it. Research is cheap, trial and error is not! And there is no porting to be done on the head . SP Quote
chayote86 Posted October 4, 2011 Author Report Posted October 4, 2011 Do they come ported already? Quote
coryv4 Posted October 4, 2011 Report Posted October 4, 2011 Do they come ported already? there is no porting to be done on the head becuase you port a cylinder on a 2 stroke not the head. Quote
chayote86 Posted October 4, 2011 Author Report Posted October 4, 2011 Ya like I said the cylinders!? Haha Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.