951banshee350 Posted October 5, 2011 Report Posted October 5, 2011 Vforce. Reeds are these still available? Are they VF2 OR VF3's.? How much$$ Quote
f4istunna Posted October 5, 2011 Author Report Posted October 5, 2011 bansheerilla pics sent to your email, let me know if interested in any of it. VTbanshy I still have the stock radiator and stock shifter. $15 + shipping for both... 951 the reeds are sold. Quote
f4istunna Posted October 5, 2011 Author Report Posted October 5, 2011 (edited) Lsr +4 Swingarm, pc silvervein some of the powdercoat is chipped off. Its solid no cracks or repairs. Comes with longer chain. $225 Full Toomey T5 exhaust system (pipes and silencers) Good overall shape normal chrome wear up near cylinders. 225 Chrome steering stem stock height. $60 Complete bottom end, Good stock crank and tranny, also Comes with flywheel and good stator with both covers. No leaks. Cases are good they have a very small little chip missing from the chain hitting. $300 Cylinders 64.5mm Good bore/crosshatch ( only .5mm over stock Means lots of bores left in them) $225 Complete clutch , basket plates everything $50 Stock radiator $10 Thumb Throttle assembly (tors plug cut off) $10 Intake boots with crossover tube $10 Chrome spindles with front wheel hubs and rotors Good bearings. $50 Rear wheel hubs $40 Brake hub and rotor rear, rotor shows some wear but still useable $10 Axle carrier Good bearings $50 Orange tank cover and grill plastic $30 Black maier front fenders factory race cuts, and black radiator/grill plastic $40 Rear plastic (painted black) $20 Front plastic cut (painted black) $20 Red front plastic with tank cover and grill/radiator plastic $40 Blue tank cover $10 (cpl stress marks) Stock seat needs recovered $10\ Kickstart lever and knuckle assembly $20 HEadlight/ run switch works good small peice of Hi/Lo headlight switch broke off still enough there to use $10 Misc hardware/parts lot Shifter, Pipe hangers, chain adjusters, steering stem clamp/bushing, headlight mounts, engine mounts... all for $20 Edited October 5, 2011 by f4istunna Quote
f4istunna Posted October 6, 2011 Author Report Posted October 6, 2011 Toomey's Shifter and radiator are sold. Im putting alot of whats left on ebay tonight when i get home Quote
delbow Posted October 10, 2011 Report Posted October 10, 2011 How much for just the spindles shipped to 61820? Quote
f4istunna Posted October 11, 2011 Author Report Posted October 11, 2011 spindles/hubs just sold yesterday sorry carrier sold also heres whats left +4 Swingarm, pc silvervein some of the powdercoat is chipped off. Its solid no cracks or repairs. Comes with longer chain. $150 Chrome steering stem stock height. $60 Complete bottom end, Good stock crank and tranny, also Comes with flywheel and good stator with both covers. No leaks. Cases are good they have a very small little chip missing from the chain hitting, outer crank bearings will need replaced. $200 Cylinders 64.5mm Good bore/crosshatch ( only .5mm over stock Means lots of bores left in them) $225 Complete oemclutch , basket plates everything very nice shape $50 Thumb Throttle assembly (tors plug cut off) $10 Rear wheel hubs $40 Brake hub and rotor rear, rotor shows some wear but still useable $10 Orange tank cover and grill plastic $30 Black maier front fenders factory race cuts, and black radiator/grill plastic $40 Rear plastic (painted black) $20 Front plastic cut (painted black) $20 Red front plastic with tank cover and grill/radiator plastic $40 Blue tank cover $10 (cpl stress marks) Stock seat needs recovered $10\ Kickstart lever and knuckle assembly $20 HEadlight/ run switch works good small peice of Hi/Lo headlight switch broke off still enough there to use $10 Misc hardware/parts lot Pipe hangers, chain adjusters, steering stem clamp/bushing, headlight mounts, engine mounts... all for $20 Quote
foxxy1992 Posted October 12, 2011 Report Posted October 12, 2011 Can you send me pictures of the swing arm to [email protected]. Thanks Quote
f4istunna Posted October 12, 2011 Author Report Posted October 12, 2011 swiingarm was just sold last night sorry. Quote
xtankx Posted October 14, 2011 Report Posted October 14, 2011 Still have the headlights?! Send PM. Quote
f4istunna Posted October 14, 2011 Author Report Posted October 14, 2011 never had headlights sorry Cylinders are sold now aswelll. Ill take offers on the rest looking to clear some room in the garage Chrome steering stem stock height. $60 Complete bottom end, Good stock crank and tranny, also Comes with flywheel and good stator with both covers. No leaks. Cases are good they have a very small little chip missing from the chain hitting, outer crank bearings will need replaced. $200 Complete oemclutch , basket plates everything very nice shape $50 Thumb Throttle assembly (tors plug cut off) $10 Rear wheel hubs $40 Brake hub and rotor rear, rotor shows some wear but still useable $10 Orange tank cover and grill plastic $30 Black maier front fenders factory race cuts, and black radiator/grill plastic $40 Rear plastic (painted black) $20 Front plastic cut (painted black) $20 Red front plastic with tank cover and grill/radiator plastic $40 Blue tank cover $10 (cpl stress marks) Stock seat needs recovered $10\ Kickstart lever and knuckle assembly $20 HEadlight/ run switch works good small peice of Hi/Lo headlight switch broke off still enough there to use $10 Misc hardware/parts lot Pipe hangers, chain adjusters, steering stem clamp/bushing, headlight mounts, engine mounts... all for $20 Quote
zx6r banshee Posted October 16, 2011 Report Posted October 16, 2011 Can u giv a package deal on the +4 swinger, a arms and axle if still available? [email protected] Quote
volcrano Posted October 16, 2011 Report Posted October 16, 2011 Can u giv a package deal on the +4 swinger, a arms and axle if still available? [email protected] can u read?? Quote
f4istunna Posted October 17, 2011 Author Report Posted October 17, 2011 lol, ya all i have left is whats listed above. MAke offers need to sell this stuff off to make some room and raise a few $ for the winter rebuild. Quote
Burke Posted October 17, 2011 Report Posted October 17, 2011 Sent you a PM on the ORG... might get some stuff from both bikes you are parting Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.