b-nasty Posted July 2, 2010 Report Posted July 2, 2010 Wanting to drag cut my harness for my banshee. Not using a key or headlights. Stock carbs removed so no tors. If anybody has done it and could get me some pics of where they put everyhting and what they cut out that would be great. thanks Quote
XxMeltIcexX Posted July 2, 2010 Report Posted July 2, 2010 Here's my stock ignition wiring diagram I used to run. Quote
notsed Posted October 25, 2012 Report Posted October 25, 2012 its rather simple, figure out what you want to keep or not and trace the plugs you dont want like tors and light back to where they tie in and cut them out. Quote
buddhabanshee Posted December 10, 2015 Report Posted December 10, 2015 I know this is an old thread, but I just picked up a banshee and am wanting to cut some bs out of my harness. So, question, do you guys cut all the factory covering off the harness to access the wires easier? And if so, what do you wrap it back up with?? Sent from my SM-G900V using Tapatalk Quote
n2otoofast4u Posted December 10, 2015 Report Posted December 10, 2015 You call Kompulsive Concepts and order what you want! Quote
hoppedupandcutdown Posted December 10, 2015 Report Posted December 10, 2015 Green, Wasn't that hand drawn schematic floating around here a couple years back, yours? I used that with great success, but alas, can no longer find it. That was pre-Kompulsive, of course. Quote
possum Posted December 10, 2015 Report Posted December 10, 2015 Just mark all connectors before removing. Then take it off and start cutting. Use electrical tape, shrink wrap, flex tube, whatever. Not very complicated Quote
Oldskool83 Posted December 10, 2015 Report Posted December 10, 2015 I have one I'll sell ya. I did mine a few months back. it's easy but prob will take you 2 hours for sure or longer once you get all the stuff out of it. I posted mine on craigslist for $25.00 Quote
locogato11283 Posted December 10, 2015 Report Posted December 10, 2015 Kompulsive Concepts is the only way to go. All new. All nicely done. No BS. Quote
buddhabanshee Posted December 10, 2015 Report Posted December 10, 2015 Not sure I wanna spend any money on one when I can just cut it down myself. Am wanting to keep all my lights for night rides at the dunes. But will cut out what all I don't need. I read about relocating the CDI...Where does everyone put it? Or is it just personal preference? Sent from my SM-G900V using Tapatalk Quote
Bennett131 Posted December 10, 2015 Report Posted December 10, 2015 Ffs the harness will be made the way you want for well under 100 dollers and you don't have to fuck with a thing. Quote
n2otoofast4u Posted December 10, 2015 Report Posted December 10, 2015 Green, Wasn't that hand drawn schematic floating around here a couple years back, yours? I used that with great success, but alas, can no longer find it. That was pre-Kompulsive, of course. Yeah Ill dig that up.. Its pretty crude, but like you said it has worked on numerous occasions. Quote
sheerider11 Posted December 10, 2015 Report Posted December 10, 2015 Not sure I wanna spend any money on one when I can just cut it down myself. Am wanting to keep all my lights for night rides at the dunes. But will cut out what all I don't need. I read about relocating the CDI...Where does everyone put it? Or is it just personal preference? Sent from my SM-G900V using Tapatalk I've seen more harnesses destroyed then fixed when people try this. KC will do what ever you want for a great price and there is no work for you to do except install Quote
buddhabanshee Posted December 10, 2015 Report Posted December 10, 2015 Hmmm. Alright maybe I'll go that route but it will have to wait. How do I get ahold of him? Sent from my SM-G900V using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.